Сравнительная характеристика современных материалов для временных несъемных конструкций зубных протезов
Диссертация
После проведения починки временных конструкций исходные показатели прочности не были достигнуты у всех исследуемых материалов. Разрушение восстановленных образцов происходит всегда адгезивно в области соединения фрагментов. Починка временных конструкций материалами, рекомендованными фирмами-изготовителями не дают оптимальные показатели прочности. Текучий композит показал более высокие результаты… Читать ещё >
Содержание
- СПИСОК СОКРАЩЕНИЙ
- Глава I. ОБЗОР ЛИТЕРАТУРЫ
- 1. 1. Материалы для изготовления временных мостов и коронок. И
- 1. 2. Кинетика полимеризационной усадки провизорных материалов
- 1. 3. Механические свойства провизорных материалов
- 1. 3. 1. Прочность материалов для временных мостов и коронок
- 1. 3. 2. Обработка поверхности материалов для временных мостов и коронок
- 1. 4. Цветовая адаптация материалов для временных конструкций
- 1. 5. Клинические исследования провизорных материалов
- Глава II. МАТЕРИАЛ И МЕТОДЫ ИССЛЕДОВАНИЯ
- 11. 1. Определение механических свойств провизорных материалов
- 11. 2. Определение усталостных свойств провизорных материалов
- 11. 3. Клинические методы исследования
- 11. 4. Статистические методы исследования
- Глава III. МЕХАНИЧЕСКИЕ СВОЙСТВА ПРОВИЗОРНЫХ МАТЕРИАЛОВ ДЛЯ ВРЕМЕННЫХ МОСТОВ И КОРОНОК
- III. 1. Механические свойства провизорных материалов под действием квазистатических нагрузок
- 111. 2. Усталостные свойства провизорных материалов
- 111. 3. Механические свойства провизорных материалов после восстановления временной конструкции
- ГЛАВА IV. КЛИНИЧЕСКАЯ ОЦЕНКА ПРИМЕНЕНИЯ САМОТВЕРДЕЮЩИХ ПЛАСТМАСС ДЛЯ ВРЕМЕННЫХ МОСТОВ И
- КОРОНОК
- IV. 1. Оценка состояния полости рта
- IV. 2. Оценка состояния поверхности провизорных конструкций из самотвердеющих композитных материалов
Список литературы
- Боровский, Е.В. Биология полости рта /Е.В. Боровский, В. К. Леонтьев. — М.: Медицина, 2001. — 274 с.
- Боровский, Е.В. Кариес зубов /Е.В. Боровский, П. А. Леус. М.: Медицина, 1979. — 255 с.
- Гланц, С. Медико-биологическая статистика: пер. с англ. /С. Гланц. — М.: Практика, 1998.-459 с.
- Гмурман, В.Е. Теория вероятностей и математическая статистика /В.Е. Гмурман. -М.: Высшая школа, 2001. 479 с.
- Иванов, B.C. Заболевания пародонта /B.C. Иванов. М.: Медицина, 1989.- 272 с.
- Максимовский, Ю.М. Новый подход к планированию и проведению противомикробной терапии у больных воспалительными заболеваниями пародонта /Ю.М. Максимовский, В. А. Багдасарян, Е. В. Володина //Институт стоматологии. 2008. — № 2(39). — С.32−35.
- Семенюк, В.М. Стоматология ортопедическая в вопросах и ответах /В.М. Семенюк, В. Д. Вагнер, П. А. Онгоев. М.: Медицинская книга, 2000. -175 с.
- Accelerated aging affects color stability of provisional restorative materials /P.G. Doray, X. Wang, J.M. Powers et al. //J. Prosthodont. 1997. — Vol.6, № 3.- P.183—188.
- Akova, T. Effect of food-simulating liquids on the mechanical properties of provisional restorative materials /Т. Akova, A. Ozkomur, H. Uysal //Dent. Mater. 2006. — Vol.22, № 12. — P. l 130−1134.
- Antibacterial properties of temporary filling materials /Н. Slutzky, I. Slutzky-Goldberg, E.I. Weiss et al. //J. Endod. -2006. Vol.32, № 3. -P.214−217.
- Arima, T. The effect of cross-linking agents on the water sorption and solubility characteristics of denture based resin /Т. Arima, H. Murata, T. Hamada //.J. Oral Rehabil. 1996. — Vol.23. — P.476−480.
- Asmussen, E. Factors affecting the color stability of restorative resins /Е. Asmussen//Acta Odontol. Scand.- 1983.-Vol.41.-P.l 1−18.
- Asmussen, E. Surface discoloration of restorative resins in relation to surface softening and oral gigiene /Е. Asmussen, E.K. Hansen //Scand. J. Dent. Res. — 1986. Vol.94. — P. l74−177.
- Bagheri, R. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials /R. Bagheri, M.F. Burrow, M. Tyas //J. Dent. 2005. — Vol.33, № 5. — P.389−398.
- Bakterielle Besied-lung der Oberflache von provisorischen Kronen und Brucken /S. Mues, E.H. Helfgen, H. Stark et al. HULL. 2008. — Vol.63, № 3. -P.201−205.
- Bayindir, F. Effect of eugenol and non-eugenol containing temporary cement on permanent cement retention and microhardness of cured composite resin /F. Bayindir, M.S. Akyil, Y.Z. Bayindir //Dent. Mater J. 2003. — Vol.22, № 4. -P.592—599.
- Belastbarkeit moderner Provisorienkunststoffe /R. Polonsky, K. Penkner, M. Haas et al. //Dtsch. Zahnarztl. Z. 1998. — Vol.53, № 11.- P.795−799.
- Bohlsen, F. Clinical outcome of glass-fiber-reinforced crowns and fixed partial dentures: a three-year retrospective study IF. Bohlsen, M. Kern //Quintessence Int. 2003. — Vol.34, № 7. — P.493−496.
- Bohnenkamp, D.M. Repair of bis-acryl provisional restorations using flowable composite resin /D.M. Bohnenkamp, L.T. Garcia //J. Prosthet. Dent. 2004. -Vol.92, № 5. — P.500−502.
- Borchers, L. Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins /L. Borchers, F. Tavassol, H. Tschernitschek //J. Prosthet. Dent. 1999. — Vol.82, № 5. -P.550−556.
- Buergers, R. Bacterial adhesion of Streptococcus mutans to provisional fixed prosthodontic material /R. Buergers, M. Rosentritt, G. Handel //J. Prosthet. Dent. 2007. — Vol.98, № 6. — P.461−469.
- Burke, F.J.T. Clinical evaluation Protemp Garant /F.J.T. Burke //Dental
- Characterisation of resin-dentine interfaces by compressive cyclic loading /R. Frankenberger, D.H. Pashley, S.M. Reich et al. //Biomaterials. 2005. -Vol.26, № 14. — P.2043−2052.
- Christensen, G.J. Provisional restorations for fixed prosthodontics /G.J. Christensen //JADA. 1996. — Vol.127. — P.249−252.
- Christensen, G.J. The fastest and best provisional restorations /G.J. Christensen //.J. Am. Dent. Assoc. 2003. — Vol.134, № 5. — P.637−639.
- Clinical effectiveness and soft tissue compatibility of a temporary restorative material /J.A. Fabiano, B.D. Sobieraj, M.L. Mather et al. //J. Int. Acad. Periodontol. 2006. — Vol.8, № 1. — P.6−9.
- Clinical performance and periodontal outcome of temporary crowns and fixed partial dentures: A randomized clinical trial /R.G. Luthardt, M. Stossel, M. Hinz et al. //J. Prosthet. Dent. 2000. — Vol.83, № 1. — P.32−39.
- Color change of newly developed esthetic restorative material immersed in food-simulating solutions /М. Fujita, S. Kawakami, M. Noda et al. //Dent. Mater. J. 2006. — Vol.25, № 2. — P.352−359.
- Color stability of provisional prosthodontic materials /A.S. Sham, F.C. Chu, J. Chai et al. //J. Prosthet. Dent. 2004. — Vol.91, № 5. — P.447152.
- Color stability of provisional resin restorative materials /S.A. Yannikakis, A.J. Zissis, G.L. Polyzois et al. //J. Prosthet. Dent. 1998. — Vol.80, № 5. — P.533−539.
- Color stability of provisional crown and bridge restoration materials /R. Lang, M. Rosentritt, A. Leibrock et al. //Br. Dent. J. 1998. — Vol.185, № 9. — P.468−471.
- Color stability of provisional restorative materials after accelerated aging /P.G. Doray, X. Wang, J.M. Powers et al. //J. Prosthodont. 2001. — Vol.10, № 3. -P.212−216.
- Darvell, B.W. Material science for dentistry, 7th ed. /B.W. Darvell. Hong Kong.: Hong Kong University Press. — 2000. — 480 p.
- Diaz-Arnold, A.M. Microhardness of provisional fixed prosthodontic materials /A.M. Diaz-Arnold, J.T. Dunne, A.H. Jones //J. Prosthet. Dent. 2000. -Vol.84.-P.499−505.
- Die provisorische Versorgung-Aufgaten, Materialkunde und Herstellung /R. Lang, M. Rosentritt, M. Behr et al. //Quintessenz. 2002. — Vol.53. — P.27−36.
- Draughn, R.A. Compressive fatigue limits of composite restorative materials /R.A. Draughn //J. Dent. Res. -1979. Vol.58, № 3. — P.1093−1096.
- Drummond, J.L. Static and cyclic loading of fiber-reinforced dental resin /J.L. Drummond, M.S. Bapna //Dent. Mater. 2003. — Vol.19, № 3. — P.226−231.
- Effect of food-simulating liquids on the flexural strength of composite and polyacid-modified composite restoratives /A.U. Yap, D.T. Tan, B.K. Goh et al. //Oper. Dent. 2000. — Vol.25, № 3. — P.202−208.
- Effect of temporary cements on the bond strength of ceramic luted to dentin /S.E. Abo-Hamar, M. Federlin, K.A. Hiller et al. //Dent Mater. 2005. -Vol.21, № 9.-P.794−803.
- Effect of variable light intensity on composite shrinkage /J.B. Dennison, P. Yaman, R. Seir et al. //J Prosthet. Dent. 1999. — Vol.82, № 5. — P.525−528.
- Effects of occlusal loading and thermocycling on the marginal gaps of light-polymerized and autopolymerized resin provisional crowns /R.J. Dubois, P. Kyriakakis, S. Weiner et al. //J. Prosthet. Dent. 1999. — Vol.82. — P. 161−166.
- Ehrenberg, D. Changes in marginal gap size of provisional resin crowns after occlusal loading and thermal cycling /D. Ehrenberg, G.I. Weiner, S. Weiner //J. Prosthet. Dent. -2000. Vol.84. -P.139−148.
- Ehrenberg, D. Long-term effects of storage and thermal cycling on the marginal adaptation of provisional resin crowns: a pilot study /D. Ehrenberg, G.I. Weiner, S. Weiner //J. Prosthet. Dent. 2006. — Vol.95, № 3. — P.230−236.
- EN ISO 4049. Dentistry-polymer-based filling, restorative and luting materials, 1st ed. International Standard- 2000.
- Evaluation of surface finish and polish of eight provisional restorative materials using acrylic bur and abrasive disk with and without pumice /А. Maalhagh-Fard, W.C. Wagner, F.E. Pink et al. //Oper Dent. 2003. -Vol.28, № 6. — P.734−739.
- Fatigue behavior of packable composites /Y. Abe, M.J. Braem, P. Lambrechts et al. //Biomaterials. -2005. Vol.26, № 17. -P.3405−3409.
- Feilzer, A.J. Curing contraction of composites and glass-ionomer cements /A.J. Feilzer, A.J. De Gee, C.L. Davidson //J. Prosthet. Dent. 1988. — Vol.59. -P.297—300.
- Ferracane, J.L. Ultraviolet light-induced yellowing of dental restorative resins /J.L. Ferracane, J.B. Moser, E.H. Greener //J. Prosthet. Dent. 1985. — Vol.54. -P.483187.
- Flexural fatigue behavior of resin composite dental restoratives /U. Lohbauer, T. von der Horst, R. Frankenberger et al. //Dent. Mater. 2003. — Vol.19, № 5. -P.43 5140.
- Flexural properties of prosthetic provisional polymers /М. Rosentritt, M. Behr, R. Lang et al. //Eur. J. Prosthodont. Restor. Dent. 2004. -Vol.12, № 2. — P.75−79.
- Four years of clinical experience with an adverse reaction unit for dental biomaterials /J.S. Vamnes, C.B. Lygre, A.G. Gronningsaeter et al. //Community Dent. Oral Epidemiol. 2004. — Vol.32, № 2. — P. 150−157.
- Fracture resistance of PMMA and resin matrix composite-based interim FPD materials /R. Lang, M. Rosentritt, M. Behr et al. //Int. J. Prosthodont. 2003. -Vol.16, № 4. P.381−384.
- Garoushi, S.K. Short glass fiber-reinforced composite with a semi-interpenetrating polymer network matrix for temporary crowns and bridges /S.K. Garoushi, P.K. Vallittu, L.V. Lassila //J. Contemp. Dent. Pract. 2008. -Vol.9, № 1.-P. 14−21.
- Gegauff, A.G., Pryor H.G. Fracture toughness of provisional resins for fixed prosthodontics /A.G. Gegauff, H.G. Pryor //J. Prosthet. Dent. 1987. — Vol.58, № 1. — P.23−29.
- Geurtsen, W. Substances released from dental resin composites and glass ionomer cements /W. Geurtsen //Eur. J. Oral Sci. 1998. — Vol.106. — P.687−695.
- Gough, M. A review of temporary crown and bridges /М. Gough //Dental Update. 1994. — Vol.6. -P.203−207.
- Guler, A.U. Effects of different drinks on stainability of resin composite provisional restorative materials /A.U. Guler, F. Yilmaz, T. Kulunk //J. Prosthet. Dent. 2005. — Vol.94, № 2. — P. l 18−124.
- Guler, A.U. Effects of various finishing procedures on the staining of provisional restorative materials /A.U. Guler, S. Kurt, T. Kulunk //J. Prosthet. Dent. 2005. — Vol.93, № 5. — P.453−458.
- Hagge, M.S. Shear bond strength of bis-acryl composite provisional material repaired with flowable composit /M.S. Hagge, J.S. Lindemuth, A.G. Jones //J. Esthet. Restor. Dent. 2002. — Vol.14, № 1. — P.47−52.
- Haselton, D.R. Color stability of provisional crown and fixed partial denture resins /D.R. Haselton, A.M. Diaz-Arnold, D.V. Dawson //J. Prosthet. Dent. -2005. Vol.93, № 1. — P.70−75.
- Haselton, D.R. Effect of storage solution on surface roughness of provisional crown and fixed partial denture materials /D.R. Haselton, A.M. Diaz—Arnold, D.V. Dawson //J. Prosthodont. 2004. — Vol.13, № 4. — P.227−232.
- HaseIton, D.R. Flexural strength of provisional crown and fixed partial denture resins /D.R. Haselton, A.M. Diaz-Arnold, M.A. Vargas //J. Prosthet. Dent. -2002. Vol.87, № 2. — P.225−228.
- In vitro Freisetzung von Restmonomeren aus provisorischen Kronen- und Brucken-materialien /А. Preib, R. Hecht, B. Windmuller et al. //DZZ. 2001. -Vol.56, № 10.-P.616−618.
- In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations /M.F. Ireland, D.L. Dixon, L.C. Breeding et al. //J. Prosthet. Dent. 1998. — Vol.80. — P. 158−162.
- Investigations into microbial colonization of temporary crown and bridge materials /S. Eick, W. Pfister, D. Welker et al. //Dtsch. Zahnarztl. Z. 1998. -Vol.53, № 4. -P.276−279.
- Johnston, W.M. Assesment of appearance match by visial observation and clinical colorimetry /W.M. Johnston, E.C. Kao //J. Dent. Res. 1989. — Vol.68. — P.819−822.
- Kim, S.H. Effect of glass-fiber reinforcement and water storage on fracture oughness (KIC) of polymer-based provisional crown and FPD materials /S.H. Kim, D.C. Watts //Int. J. Prosthodont. -2004. Vol.17, № 3. -P.18−22.
- Kim, S.H. Exotherm behavior of the polymer-based provisional crown and fixed partial denture materials /S.H. Kim, D.C. Watts //Dent Mater. 2004. -Vol.20, № 4.-P.383−387.
- Kim, S.H. In vitro study of edge-strength of provisional polymer-based crown and fixed partial denture materials /S.H. Kim, D.C. Watts //Dent. Mater. — 2007. Vol.23, № 12. — P. l570−1573.
- Kim, S.H. Polymerization shrinkage-strain kinetics of temporary crown and bridge materials /S.H. Kim, D.C. Watts //Dent Mater. 2004. -Vol.20, № 1. -P.88−95.
- Klinische Studie zur Qualitat und Verrbeitung temporarer Kronen- und Bruckenkunststoffe /R.G. Luthardt, M. Stossel, M. Hinz et al. //Dtsch. Zahnarztl. Z. 1998. — Vol.53, № 9. — P.633−638.
- Knoernschild, K.L. Periodontal tissue responses after insertion of artificial crowns and fixed partial dentures /K.L. Knoernschild, S.D. Campbell //J. Prosthet. Dent. 2000. — Vol.84, № 5. — P.492−498.
- Korkmaz, T. Dynamic mechanical analysis of provisional resin materials reinforced by metal oxides /Т. Korkmaz, A. Dogan, A. Usanmaz //Biomed. Mater. Eng. 2005. — Vol.15, № 3. — P. 179−188.
- Koumjian, J.H. Evaluation of fracture resistance of resin used for provisional restorations /J.H. Koumjian, A. Nimmo //J. Prosthet. Dent. -1990. Vol.64. -P.654−657.
- Kuhar, M. Effects of polishing techniques on the surface roughness of acrylic denture base resins /М. Kuhar, N. Funduk //J. Prosthet. Dent. 2005. — Vol.93, № 1. — P.76−85.
- Lee, H.L. A comparison of ultraviolet-curing and self-curing polymers in preventive, restorative and orthodontic dentistry /H.L. Lee, J.A. Orlowski, B.J. Rogers //Int. Dent. J. 1976. — Vol.26, № 2. — P. 134−151.
- Lepe, X. Retention of provisional crowns fabricated from two materials with the use of four temporary cements /X. Lepe, D.J. Bales, G.H. Johnson //J. Prosthet. Dent. 1999. r-Vol.81, № 4. P.469175.
- Lieu, C. In vitro comparison of peak polymerization temperatures of 5 provisional restoration resins /С. Lieu, T.M. Nguyen, L. Payant //J. Can. Dent. Assoc. 2001. — Vol.67, № 1. — P.36−39.
- Load-bearing capacity of direct four unit provisional composite bridges with fibre reinforcement /М. Eisenburger, J. Riechers, L. Borchers et al. //J. Oral Rehabil. -2008. Vol.35, № 5. -P.375−381.
- Lowe, R.A. The art and science of provisionalization /R.A. Lowe //Int. J. Periodontics Restorative Dent. 1987. — Vol.7, № 3. — P.299−304.
- Mancuso, A. Provisionalization of the anterior aesthetic case /А. Mancuso //Dent. Today. 2000. — Vol.19, № 2. — P.88−89.
- Marashi, J. Temporization: freehand artistry defining clinical success /J. Marashi //Dent. Today. -2005. Vol.24, № 10. -P.134−136.
- Marginal adaptation and color stability of four provisional materials /E.J. Givens, G. Neiva, P. Yaman et al. //J. Prosthodont. 2008. — Vol.17, № 2. -P.97−101.
- Marus, R. Treatment planning and smile design using composite resin /R. Marus //Pract. Proced. Aesthet. Dent. 2006. — Vol.18, № 4. — P.235−241.
- McCabe, J.F. Cure performance of light-activated composites by differential thermal analysis (DTA) /J.F. McCabe //Dent. Mater. 1985. — Vol.l. — P.231−234.
- McDonald, T.R. Temporization material alleviates many manipulation and performance challenges /T.R. McDonald //Dent Today. 2003. — Vol.22, № 3. -P.34−35.
- Mechanical properties of light-cured composites polymerized with several additional post-curing methods /C.J. Soares, E.C. Pizi, R.B. Fonseca et al. //Operative Dentistry. 2005. — Vol.30. — P.389−394.
- Mechanical properties of provisional crown and bridge materials: chemical-curing versus dual-curing systems /М. Balkenhol, M.C. Mautner, P. Ferger et al. //J. Dent. 2008. — Vol.36, № 1. — P. 15−20.
- Merten, H.A. Technical improvements with wire ligatures-a clinical comparison between different paste/paste systems /Н.А. Merten, J. Wiltfang //Quintessenz. 1998. — Vol.49, № 4. — P.351−357.
- Meyer, A. Direkte provysoricsche Versorgrung /А. Meyer, P. Muller //Quintessenz. 2006. — Vol.57, № 4. — P.371−378.
- Miller, M.B. Automix composite provisional materials /М.В. Miller //Reality. 1996. — P.243−248.
- Monday, J.L. Marginal adaptation of provisional acrylic resin crowns /J.L. Monday, D. Blais //J. Prosthet. Dent. 1985. -Vol.54, № 2. -P.194−197.
- Monotonic flexure and fatigue strength of composites for provisional and definitive restorations /S.S. Scherrer, A.H. Wiskott, Vol. Coto-Hunziker et al. //J. Prosthet. Dent. 2003. — Vol.89, № 6. — P.579−588.
- Moulding, M.B. Intrapulpal temperature during direct fabrication of provisional restorations /М.В. Moulding, P.E. Teplitsky //Int. J. Prosthodont. -1990.- Vol.3. -P.299−304.
- Mues, S. Oberflachenvergutung von provisorischen Kronen und Brucken /S. Mues //Quintessenz. 2008. — Vol.59, № 4. — P.371−378.
- Nejatidanesh, F. Marginal accuracy of interim restorations fabricated from four interim autopolymerizing resins /F. Nejatidanesh, H.R. Lotfi, O. Savabi //J. Prosthet. Dent. 2006. — Vol.95, № 5. — P.364−367.
- Nomoto, R. Effects of mixing methods on the compressive strength of glass ionomer cements /R. Nomoto, J.F. McCabe //J. Dent. 2001. — Vol.29. -P.205−210.
- Osman, Y.I. Flexural strength of provisional restorative materials /Y.I. Osman, C.P. Owen //J. Prosthet. Dent. 1993. Vol.70, № 1. — P.94−96.
- Oysaed, H. Water sorption and filler characteristics of composites for use in posterior teeth /Н. Oysaed, I.E. Ruyter //J. Dent. Res. 1986. Vol.65. -P.1315−1318.
- Pannewig, R. Provisorien-Herstellung-funktionell und effizient (I) /R. Pannewig //Quintessenz. 1995. — Vol.25. -P.895−903.
- Pannewig, R. Provisorien-Herstellung-funktionell und effizient (II) /R. Pannewig //Quintessenz. 1995. — Vol.25. — P.977−988.
- Polymerization exothermal reaction of dental prosthetic resin for temporary crowns. A comparative evaluation /А. Barlattani, P. Cardelli, F. Cioccolanti //Minerva Stomatol. 2002. — Vol.51. — P. l 1−20.
- Provisional crown and fixed partial denture materials: mechanical properties and degree of conversion /М. Balkenhol, P. Ferger, M.C. Mautner et al. //Dent. Mater. 2007. — Vol.23. — P.1574−1583.
- Puckett, A.D. Method to measure polymerization shrinkage of light-curing composites /A.D. Puckett, R. Smoth //J. Prosthet. Dent. -1992. — Vol.68. P.56−58.
- Pulpal response to a bis-acryl-plastic (Protemp) temporary crown and bridge material /L. Fleisch, P. Cleaton-Jones, M. Forbes et al. //J. Oral Pathol. -1984.-Vol.13.-P.622−631.
- Quaas, A. Reparatur von Kronen und Bruckenprovisorien /А. Quaas, M. Kern //Quintessenz. 2005. — Vol.56. — P.3916.
- Quirynen, M. The influence of surface roughness and surface-free energy on supra-and subgingival plaque formation in man /М. Quirynen, C.M. Bollen //J. Clin. Periodontol. 1995. — Vol.22. -P.l-14.
- Raab, H.M. Diagnostische Aspekte des Zahnschmerzes /Н.М. Raab //Zahnar. ztl. Mitt. 2000. — Vol.100. — P.58−63.
- Rawls, H, R. Restorative resins /H.R. Rawls, J. Esquivelth • *
- Upshaw//Philips science of dental materials. 11 ed. St. Louis: Elsevier, 2003. —411 p.
- Reaction exothermia of 2 relining resins for temporary crowns /L. Bevilacqua, M. Biasotto, M. Cadenaro et al. //Minerva Stomatol. 2005. -Vol.54. — P.35—41.
- Recommendations for conducting controlled clinical studies of dental restorative materials /R. Hickel, J. Roulet, S. Bayne et al. //J. Adhes. Dent. — 2007. Vol.9, № 1. — P.121−147.
- Rees, J.S. The polymerization shrinkage of composite resins /J.S. Rees, P.H. Jacobsen //Dent. Mater. 1989. -Vol.5. — P.4114.
- Robinson, F.B. Marginal fit of direct temporary crowns /F.B. Robinson, S. Hovijitra //J. Prosthet. Dent. 1982. — Vol.47, № 4. — P.390−392.
- Rompen, E. Soft tissue stability at the facial aspect of gingivally converging abutments in the esthetic zone: a pilot clinical study /Е. Rompen //J. Prosthet. Dent. -2008. Vol.99, № 3. -P.167.
- Ruyter, I.E. Physical and chemical aspects related to substances released from polymer materials in an aqueous environment /I.E. Ruyter //Adv. Dent. Res. 1995. — Vol.9. — P.344−347.
- Saygili, G. The effect of placement of glass fibers and aramid fibers on the fracture resistance of provisional restorative materials /G. Saygili, S.M. Sahmali, F. Demirel //Oper. Dent. 2003. — Vol.28, № 1. — P.80−85.
- Scotti, R. The in vitro color stability of acrylic resins for provisional restorations /R. Scotti, S.C. Mascellani, F. Forniti //Int. J. Prosthodont. 1997. -Vol.10.-P. 164−168.
- Seghi, R.R. Colorimetric change in composites resulting from visible-light-initiated polymerization /R.R. Seghi, M.D. Gritz, J. Kim //Dent. Mater. -1990,-Vol.6.-P.133−137.
- Seghi, R.R. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain /R.R. Seghi, E.R. Hewlett, J. Kim //J. Dent. Res. 1989. -Vol.68. — P. 1760−1764.
- Sen, D. The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins /D. Sen, G. Goller, H. I§ sever //J. Prosthet. Dent. 2002. — Vol.88, № 5. — P.527−532.
- Silikas, N. Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations /N. Silikas, A. Al-Kheraif, D.C. Watts //Biomaterials. 2005. -Vol.26, № 2.-P. 197−204.
- Temperature rise during polymerization of three different provisional materials /S.H. Altintas, I. Yondem, О. Так et al. //Clin. Oral. Investig. 2008. — Vol.12, № 3.-P.283−286.
- The comparison of provisional luting agents and abutment surface roughness on the retention of provisional implant-supported crowns /Y. Kim, J. Yamashita, J.L. Shotwell et al. //J. Prosthet. Dent. 2006. — Vol.95, № 6. -P.450−455.
- The effect of fatigue damage on the force required to remove a restoration in a cement-retained implant system /D. Kaar, Y. Oshida, C.I. Andreset al. //J. Prosthodont. 2006. — Vol.15, № 5. — P.289−294.
- The effect of three polishing systems on the surface roughness of four hybrid composites: a profilometric and scanning electron microscopy study /В.А. Kaplan, G.R. Goldstein, T.V. Vijayaraghavan et al. //J. Prosthet. Dent. -1996.- Vol.76. -P.34−38.
- The Effectiveness of Systemp desensitizer in the treatment of dentine hypersensitivity ID.A. Stewardson, R.J. Crisp, S. McHugh et al. //Prim. Dent. Care. 2004. — Vol.11, № 3. — P.71−76.
- The impact of composite structure on its elastic response /MJ. Braem, P. Lambrechts, V. Van Doren //J. Dent. Res. 1986. — Vol.65. — P.648−653.
- The relationship between water absorption characteristics and the mechanical strength and resin-modified glass-ionomer cements in long-term water storage /А. Akashi, Y. Matsuya, M. Unemori et al. //Biomaterials. -1999. Vol.20. — P. 1573−1578.
- Time-dependent strength and fatigue resistance of dental direct restorative materials /U. Lohbauer, R. Frankenberger, N. Kramer et al. //J. Mater. Sci. Mater. Med. -2003. Vol.14, № 12. -P.1047−1053.
- Tjan, A.H. Marginal fidelity of crowns fabricated from six proprietary provisional materials /А.Н. Tjan, J. Castelnuovo, G. Shiotsu //J. Prosthet. Dent. 1997. — Vol.77. — P.482−485.
- Tschernitschek, H. Provisorische Klebebrucken /Н. Tschernitschek //Dtsch. Zahnarztl. Z. 1998. — Vol.53, № 9. — P.613−615.
- Turker, S.B. Effect of five staining solutions on the color stability of two acrylics and three composite resins based provisional restorations /S.B. Turker, A. Kocak, E. Aktepe //Eur. J. Prosthodont. Restor. Dent. 2006. — Vol.14, № 3. -P.121—125.
- Um, C.M. Staining of resin-based veneering materials with coffee and tea /С.М. Um, I.E. Ruyter //Quint. Int. 1991. — Vol.22. — P.377−386.
- Wall, A.W.G. The polymerization contraction of visible-light activated composite resins /A.W.G Wall, J.F. McCabe, J.J. Murray //J. Dent. 1988. -Vol.16. -P.77−81.
- Watts, D.C. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development /D.C. Watts, A.J. Cash //Dent. Mater. 1991. — Vol.7. — P.281−287.
- Watts, D.C. Optimal specimen geometry in bonded disk shrinkage-strain measurements on light-cured biomaterials /D.C. Watts, A.S. Marouf //Dent. Mater. 2000. — Vol. 16. — P.447−451.
- Wegner, S.M. In vivo study of the marginal integrity of composite resin buildups after full crown preparation /S.M. Wegner, S. Wolfart, M.J. Kern //J. Adhes Dent. 2004. — Vol.6. — P. 151−155.
- Welker, D. Interimsversorgungen bei Kronen- und Bruckenersatz-Indikationen, Werkstoffe, biologische Aspekte, Methodik /D. Welker, A. Rzanny, R. Gobel //Quintessenz. Zahn. 1999. -V25, № 10. — P. l 133−1144.
- Whalen, S. Intrapulpal temperature increases with temporary crown and bridge materials /S. Whalen, M. Bouschlicher //Gen. Dent. 2003. — Vol.51, № 6. — P.534−537.
- Windmuller, B. Direkte provisorische Versorgung-ein kurzer Uberblick /В. Windmuller //Quintessenz. Zahn. 1999. — V25, № 9. — P. l 145−1154.
- Wirz, J. Moderne Provisorienkunststoffe. Teil I: Materialubersicht und Untersuchungsmethoden /J. Wirz, N. Nigg, F. Schmidli //Quintessenz. 1995. -Vol.46.-P.83−91.
- Wirz, J. Moderne Provisorienkunststoffe. Teil II: Resultate und Diskussion /J. Wirz, N. Nigg, F. Schmidli //Quintessenz. 1995. — Vol.46. -P.245−255.
- Yap, A.U. Effect of food-simulating liquids on surface characteristics of composite and polyacid-modified composite restoratives /A.U. Yap, J.S. Low, L.F. Ong //Oper. Dent. 2000. — Vol.25, № 3. — P. 170−176.
- Yilmaz, A. Fracture resistance of various temporary crown materials /А. Yilmaz, S. Bayda§ //J. Contemp. Dent. Pract. 2007. — Vol.8, № 1. — P.44−51.
- Young, H.M. Comparative in vitro evaluation of two provisional restorative materials /Н.М. Young, C.T. Smith, D. Morton //J. Prosthet. Dent. -2001.-Vol.89, № 2. P. 129−132.