Регулирование технологических и эксплуатационных свойств в системе ПЭНД-эпоксидный стеклопластик
Диссертация
Выявлено влияние интенсивности обработки коронным разрядом поверхности модифицированного ПЭНД на изменение поверхностных характеристик и адгезионную прочность комбинированных изделий. Показано, что в зависимости от интенсивности обработки и природы модификатора обеспечивается условие смачивания и образуется прочное адгезионное соединение, что позволяет исключить из технологической схемы намотку… Читать ещё >
Содержание
- 1. Введение
- 2. Литературный обзор
- 2. 1. Производство труб для транспортировки нефти и газа
- 2. 2. Регулирование структуры и свойств ПЭНД модификацией его сополимерами этилена с а-олефинами
- 2. 3. Отверждение и модификация эпоксидных смол
- 2. 4. Внутренние напряжения в комбинированных изделиях
- 2. 5. Трещинообразование в изделиях из ПЭНД и его трещиностойкость
- 2. 6. Адгезия, поверхностные явления в полиэтилене и обработка его поверхности
- 3. Объекты и методы исследования
- 3. 1. Объекты исследования
- 3. 2. Методы исследования
- 4. Результаты и их обсуждение
- 4. 1. Регулирование структуры и свойств ПЭНД модификацией его сополимерами этилена с а-олефинами
- 4. 1. 1. Выбор содержания модифицирующих добавок в ПЭНД-композиции и их влияние на физико-механические характеристики смесей и их структуру
- 4. 1. 2. Исследование релаксационных свойств ПЭНД-композиций
- 4. 1. 3. Влияние модификаторов на остаточные напряжения в комбинированных изделиях
- 4. 1. 4. Влияние модификаторов на трещиностойкость материалов
- 4. 1. 5. Исследование химической стойкости ПЭНД-композиций
- 4. 1. 6. Исследование реологических характеристик ПЭНД-композиций
- 4. 2. Модификация эпоксидного связующего для производства стеклопластиковой оболочки
- 4. 3. Регулирование адгезионного взаимодействия на границе раздела
- 4. 1. Регулирование структуры и свойств ПЭНД модификацией его сополимерами этилена с а-олефинами
- ПЭНД — эпоксидный стеклопластик
- Практическая значимость работы
- Выводы
Список литературы
- Бухин В.Е. Перспективы развития пластмассовых трубопроводов в России // Трубопроводы и экология. — 2001. № 3. — С. 19−23-
- Каган Д.Ф. Трубопроводы из пластмасс. М.: Химия, 1980. — 296 е.-
- Hosoda S., Hon Н., Yada К., Nakahara S., Tsuji M. Degree of comonomer inclusion into lamella crystal for propylene / olefin copolymers // Polymer. -2002. v. 43 (26). — p. 7451−7460-
- A.G. Gibson, C. Hicks. Multilayer plastic pipes // Plastics, Rubber and Composites: An International science and Engineering Journal of the Institute of Materials. 2000. — v. 29 (10). — p. 509−513-
- Никифоров B.H., Якубовская C.B. и др. Армированные трубы из полиэтилена // Полимергаз. 2001. — № 2. — С. 22−25-
- Антонов В.Г., Рябей Ю. С., Сорокин Н. В., Зайцев К. И. Армированные пластмассовые трубы для транспортировки газа // Потенциал. 2000. -№ 6. — С. 35−37-
- Авторское свидетельство № 165 366 СССР от 23.09.1964 г.-
- Авторское свидетельство № 525 437 СССР от 15.08.1976 г.-
- Патент № 2 171 947 РФ от 14.08.2001 г.-
- Патент № 19 841 121 Германия от 09.09.1998 г.-
- Патент № 358 178 В1 Европейское Патентное Бюро-
- Патент № 686 797 ЕПБ от 21.04.1995 г.-
- Патент № 5 564 413 США от 15.10.1996 г.-
- Сирота А.Г. Модификация структуры и свойств полиолефинов. Л.: «Химия», 1984.-
- Гуль В.Е., Кулезнев В. Н. Структура и механические свойства полимеров. -М.: «Лабиринт», 1994.-
- Кулезнев В.Н. Смеси полимеров. М.: «Химия», 1980. — 304 е.-
- Мэнсон Дж., Сперлинг JT. Полимерные смеси и композиты, пер. с англ., под ред. Ю. Д. Годовского. М., «Химия», 1979.-
- Гуль В.Е. Структура и прочность полимеров. М.: «Химия», 1978. — 328 е.-
- Birkinshaw G., Byddy М., Doly S., О' Neel M.J. Rubber-modified polyethylenes // Applied Polymer Science. 1989. — v. 11. — p. 1967−1972-
- Chen Y.L., Bengt U. Modification of the polyethylene with rubbers. Mechanical properties // Journal of Polymer Science. 1989. — v. 12. — p. 4051−4055-
- Даличкевич A.A.,. Кирюшкин С. Г Повышение ударной вязкости полиэтилена низкого давления // Высокомолекулярные соединения. -1991.-№ 12.-С. 883−886-
- Филиппова H.H. Исследования в области регулирования структуры и свойств полиэтилена путем введения блоксополимеров: Автореф. дис. канд. хим. наук. М., 1979. — 16 е.-
- Сойреф Д.А. Регулирование структуры полиэтилена в литьевых изделиях с целью улучшения их эксплуатационных характеристик: Автореф. дис. канд. хим. наук. М., 1983. — 16 е.-
- Николаева Н.Ю. Повышение долговечности ориентированных изделий из полиолефинов: Автореф. дис. канд. хим. наук. М., 1993. — 16 е.-
- Мельяненкова И.А. Пленки и экструзионно-выдувные изделия на основе полиэтилена высокой плотности с улучшенными эксплуатационными характеристиками: Автореф. дис. канд. техн. наук. -М., 1988.- 16 с-
- Алмаева JI.C. Светостойкая пленка на основе ПЭВД для сельского хозяйства: Автореф. дис. канд. техн. наук. М., 1990. — 16 е.-
- Гаттас И.Н. Интенсификация процессов переработки полиэтилена высокой плотности методом литья под давлением: Автореф. дис. канд. техн. наук. М., 1982. — 16 е.-
- Васильев В.А. Материалы пониженной горючести на основе полиэтилена с улучшенными технологическими и эксплуатационными характеристиками: Автореф. дис. канд. техн. наук. М., 1986. — 16 е.-
- Ахортгор И.В. Материалы на основе модифицированного полипропилена для переработки в изделия медицинского назначения: Автореф. дис. канд. техн. наук. М., 1992. — 16 е.-
- Степанова А.В. Материалы для кабельной изоляции на основе полиолефинов: Автореф. дис. канд. техн. наук. М., 1994. — 16 е.-
- Батиашвили М.С. Армированные композиционные материалы на основе полипропилена для автомобильной промышленности: Автореф. дис. канд. хим. наук. М., 1983. — 16 е.-
- Galloway J.A., Montminy M.D., Macosko C.W. Image analysis for interfacial area and cocontinuity detection in polymer blends // Polymer. -2002. v. 43 (17). — p. 4715−4722-
- Blacher S., Brouers F., Fayt R., Teyssie P. Microanalysis of miscibility of polymer blends // Journal of Polymer Science, Polymer Physics. 1993. — v. 31.-p. 655−662-
- Utracki L.A. Polymer blends and their miscibility // Journal of Rheology. -1991.-v. 35. p. 1615−1637-
- Tongfei S., Gangyao W., Wei J., Lijia A., Binyao L. Monte-Carlo simulation of miscibility of polymer blends with repulsive interactions: effect of chain structure // European Polymer Journal. 2003. — v. 39 (3). — p. 551−560-
- Palieme J.F. Crystallization behavior of miscible polymer blends // Rheological Acta. 1990. — v. 29. — p. 204−214-
- Doi M., Ohta T. Simulation on polymer blends miscibility // Journal of Chemical Physics. 1991. — v. 95. — p. 1242−1248-
- Lee H.M., Park 0.0. A new method for characterizing polyolefin blends // Journal of Rheology. 1994. — v. 38. — p. 1405−1425-
- Rostami S. Crystallization behavior of a semicrystalline miscible blend // Polymer. 1990. — v. 31 (5). — p. 899−904-
- Фридман МЛ. Композиции на основе ПЭНД с улучшенными реологическими характеристиками // Журнал ВХО им. Д. И. Менделеева. 1989.-№ 11.-С. 38−42-
- Shan C.L.P., Soares J.B.P., Penlidis A. HDPE / LLDPE reactor blends with bimodal microstructures part II: rheological properties // Polymer. — 2003. -v. 44(1).-p. 177−185-
- Shan C.L.P., Soares J.B.P., Penlidis A. HDPE / LLDPE reactor blends with bimodal microstructures part I: mechanical properties // Polymer. — 2002. -v. 43 (26).-p. 7345−7365-
- Coutry S., Spells S.J. The effect of short chain branching on local chain organization in isotopically labeled blends of polyethylene // Polymer. -2002. v. 43 (18). — p. 4957−4965-
- Zhou Z., Lu X., Brown N. The effect of blending high-density and linear low-density polyethylenes on slow crack growth // Polymer. 1993. — v. 34 (12).-p. 2520−2523-
- Greco R., Mancarella C., Martusceili E., Ragosta G., Jinhua Y. Polyolefin blends: 1. Effect of EPR composition on structure, morphology and mechanical properties of HDPE / EPR alloys // Polymer. v. 28 (11). — p. 1922−1928-
- Kontou E., Niaounakis M., Spathis G. Thermomechanical behavior of metallocene ethylene-a-olefin copolymers // European Polymer Journal. -2002. v. 38 (12). — p. 2477−2487-
- Braun J.L., Madkour T.M., Mark J.E. Some simulations on crystallinity in a typical linear low-density polyethylene // European Polymer Journal. 2004. -v. 40 (2).-p. 245−249-
- Zhao Y., Vaughan A.S., Sutton S.J., Swingler S.G. On the crystallization, morphology and physical properties of a clarified propylene / ethylene copolymer // Polymer. 2001. — v. 42 (15). — p. 6587−6597-
- Tso C.C., DesLauriers P.J. Comparison of methods for characterizing comonomer composition in ethylene 1-olefin copolymers: 3D-TREF vs. SEC-FTIR // Polymer. 2004. — v. 45 (8). — p. 2657−2663-
- Seguela R., Rietsch F. Tensile drawing behaviour of ethylene / ?/-olefin copolymers: influence of the co-unit concentration // Polymer. 1986. — v. 27 (5).-p. 703−708-
- Feng Y., Hay J.N. The characterization of random propylene-ethylene copolymer // Polymer. 1998. — v. 39 (25). — p. 6589−6596-
- Yamaguchi M., Miyata H., Tan V., Gogos C.G. Relation between molecular structure and flow instability for ethylene / a-olefin copolymers // Polymer. -2002. v. 43 (19). — p. 5249−5255-
- Sirotkin R.O., Brooks N.W. The effect of morphology on the yield behaviour of polyethylene copolymers // Polymer. 2001. — v. 42 (8). — p. 3791−3797-
- Matthews R.G., Ward I.M., Capaccio G. Structural heterogeneity and dynamic mechanical relaxations of ethylene ?/-olefin copolymers // Journal of Polymer Science, Part B: Polymer Physics. 1999. — v. 37 (1). — p. 51−60-
- Hosoda S., Uemura A. Effect of the structural distribution on the mechanical properties of linear low-density polyethylenes // Polymer Journal. 1992. -v. 24(9).-p. 939−949-
- Laihonen S., Gedde U.W., Werner P.-E., Westdahl M., Jaaskelainen P., Martinez-Salazar J. Crystal structure and morphology of melt-crystallized poly (propylene-staf-ethylene) fractions // Polymer. 1997. — v. 38 (2). — p. 371−377-
- Laihonen S., Gedde U.W., Werner P.-E., Martinez-Salazar J. Crystallization kinetics and morphology of poly (propylene-staf-ethylene) fractions // Polymer. 1997. — v. 38 (2). — p. 361−369-
- Zhao Y., Vaughan A.S., Sutton S.J., Swingler S.G. On nucleation and the evolution of morphology in a propylene / ethylene copolymer // Polymer. -2001. v. 42 (15). — p. 6599−6608-
- Keith H.D. A different approach to morphological diversity and surface nucleation in linear polyethylene // Polymer. 2003. — v. 44 (3). — p. 703 710-
- Mengbo L., Jianhua H., Yingcai C., Jianmin X. Correlation between shape and size of linear polymer chains // European Polymer Journal. 2001. — v. 37 (8).-p. 1587−1590-
- Zhenhua S., Fusheng Y., Yuchen Q. Characterization, morphology and thermal properties of ethylene-propylene block copolymers // Polymer. -1991.-v. 32 (6).-p. 1059−1064-
- Kilburn D., Bamford D., Lupke T., Dlubek G., Menke T.J., Alam M.A. Free volume and glass transition in ethylene / 1-octene copolymers: positron lifetime studies and dynamic mechanical analysis // Polymer. 2002. — v. 43 (25).-p. 6973−6983-
- Junting X., Xurong X., Linxian F. Short chain branching distributions of metallocene-based ethylene copolymers // European Polymer Journal.2000. v. 36 (4). — p. 685−693-
- Gabriel C., Kokko E., Lofgren B., Seppala J., Munstedt H. Analytical and rheological characterization of long-chain branched metallocene-catalyzed ethylene homopolymers // Polymer. 2002. — v. 43 (24). — p. 6383−6390-
- Shroff R.N., Mvridis H. Long-chain-branching index for essentially linear polyethylenes // Macromolecules. 1999. — v. 32 (25). — p. 8454−8464-
- Hosoda S., Nomura H., Gotoh Y., Kihara H. Degree of branch inclusion into the lamellar crystal for various ethylene / tf-olefin copolymers // Polymer. -1990.-v. 31 (10).-p. 1999−2005-
- Aguilar M., Vega J.F., Sanz E., Martinez-Salazar J. New aspects on the Theological behaviour of metallocene catalysed polyethylenes // Polymer.2001. v. 42 (24). — p. 9713−9721-
- Xiaodong Z., Guanyi S. Effect of converting the crystalline form from a to e on the mechanical properties of ethylene / propylene random and block copolymers // Polymer. 1994. — v. 35 (23). — p. 5067−5072-
- Yeh P.-L., Birley A.W., Hemsley D.A. The structure of propylene-ethylene sequential copolymers // Polymer. 1985. — v. 26 (8). — p. 1155−1161-
- Sirotkin R.O., Brooks N.W. The dynamical mechanical relaxation behaviour of polyethylene copolymers cast from solution // Polymer. 2001. — v. 42 (24).-p. 9801−9808-
- Matthews R.G., Unvvin A.P., Ward I.M., Capaccio G. Comparison of the dynamic mechanical relaxation behaviour of linear low- and high-density polyethylenes // Journal of Macromolecular Science Physics. — 1999. — v. B 38 (1−2).-p. 123−143-
- Giowinkowski S., Makrocka-Rydzyk M., Wanke S., Jurga S. Molecular dynamics in polyethylene and ethylene-1-butene copolymer investigated by NMR methods H European Polymer Journal. 2002. — v. 38 (5). — p. 961 969-
- Starck P., Lofgren B. Thermal properties of ethylene / long chain a-olefin copolymers produced by metallocenes // European Polymer Journal. 2002. -v. 38(1).-p. 97−107-
- Baker B.B. Jr., Bonesteel J.K., Keating M.Y. Conformation of ethylene / propylene copolymers (random or block) as seen by 13C NMR, IR and thermal methods // Tennochimica Acta. 1990. — v. 166. — p. 53−68-
- Elkoun S., Gaucher-Miri V., Seguela R. Tensile yield and strain hardening of homogeneous ethylene copolymers compared with heterogeneous. copolymers // Materials Science and Engineering A. 1997. — v. 234−236. -p. 83−86-
- Toyota A., Mizuno A., Tsutsui T., Kaneko H., Kashiwa N. Synthesis and characterization of metallocene-catalysed propylene-ethylene copolymer with end-capped functionality // Polymer. 2002. — v. 43 (23). — p. 6351−6355-
- Chen H.B., Karger-Kocsis J., Wu J.S., Varga J. Fracture toughness of a- and «-phase polypropylene homopolymers and random- and block-copolymers // Polymer. 2002. — v. 43 (24). — p. 6505−6514-
- Sterzynski T., Lambla M., Crazier H., Thomas M. Structure and properties of nucleated random and block copolymers of propylene // Advances in Polymer Technology. 1994. — v. 13 (1). — p. 25−36-
- Varga J., Schulek-Toth F. Crystallization, melting and spherulitic structure of «-nucleated random propylene copolymers // Journal of Thermal Analysis. -1996.-v. 47 (4).-p. 941−955-
- Shan C.L.P., Soares J.B.P., Penlidis A. HDPE / LLDPE reactor blends with bimodal microstructures part II: rheological properties // Polymer. — 2003. -v. 44(1).-p. 177−185-
- Bing N., Qin Z., Yong W., Rongni D., Qiang F. Three-dimensional phase morphologies in HDPE / EVA blends obtained via dynamic injection packing molding // Polymer. 2003. — v. 44 (19). — p. 5737−5747-
- Na B., Zhang Q., Fu Q., Zhang G., Shen K. Super polyolefin blends achieved via dynamic packing injection molding: the morphology and mechanical properties of HDPE / EVA blends // Polymer. 2002. — v. 43 (26). — p. 73 677 376-
- Fu Z., Fan Z., Zhang Y., Feng L. Structure and morphology of polypropylene / poly (ethylene-co-propylene) in situ blends synthesized by spherical Ziegler-Natta catalyst // European Polymer Journal. 2003. — v. 39 (4). — p. 795−804-
- MacCallum J.R., Smith J.S.G. A novel method for producing miscible polymer blends // European Polymer Journal. 2000. — v. 36 (3). — p. 491 494-
- Shan C.L.P., Soares J.B.P., Penlidis A. HDPE / LLDPE reactor blends with bimodal microstructures part I: mechanical properties // Polymer. — 2002. -v. 43 (26).-p. 7345−7365-
- Blacher S., Brouers F., Fayt R., Teyssie P. Multifractal analysis. A new method for the characterization of the morphology of multicomponent polymer systems // Journal of Polymer Science, Part B: Polymer Physics. -1993.-v. 31 (6).-p. 655−662-
- Coutry S., Spells S.J. Molecular changes on drawing isotopic blends of polyethylene and ethylene copolymers: 1. Static and time-resolved sans studies // Polymer. 2003. — v. 44 (6). — p. 1949−1956-
- Xu J., Xu X., Zheng Q., Feng L., Chen W. Dynamic rheological behaviors of metallocene-based ethylene-butene copolymers and their blends with low-density polyethylene // European Polymer Journal. 2002. — v. 38 (2). — p. 365−375-
- Rostami S.D. Advances in theory of equilibrium melting point depression in miscible polymer blends // European Polymer Journal. 2000. — V. 36 (10). -p. 2285−2290-
- Zhang F., Gong Y., He T. Multiple melting behavior of isotactic polypropylene and poly (propylene-co-ethylene) after stepwise isothermal crystallization // European Polymer Journal. 2003. — v. 39 (13). — p. 23 152 322-
- Hill M.J., Barham P.J. Ostwald ripening in polyethylene blends // Polymer. -1995. v. 36 (17). — p. 3369−3375-
- Kontopoulou M., Wang W., Gopakumar T.G., Cheung C. Effect of composition and comonomer type on rheology, morphology and properties of ethylene-tf-olefin copolymer / polypropylene blends // Polymer. 2003. — v. 44 (24).-p. 7495−7504-
- Ran S., Hsiao B.S., Agarwal P.K., Varma-Nair M. Structure and morphology development during deformation of propylene based ethylene-propylene copolymer and its blends with isotactic polypropylene // Polymer. 2003. -v. 44 (8).-p. 2385−2392-
- Kwag H., Rana D., Cho K., Rliee J., Woo T., Lee B.H., Choe S. Binary blends of metallocene polyethylene with conventional polyolefins: rheological and morphological properties // Polymer Engineering and Science. -2000. v. 40 (7). — p. 1672−1681-
- Hameed T., Hussein I.A. Rheological study of the influence of Mw and comonomer type on the miscibility of m-LLDPE and LDPE blends // Polymer. 2002. — v. 43 (25). — p. 6911−6929-
- Hussein I.A., Hameed T., Abu Sharkh B.F., Mezgliani K. Miscibility of hexane-LLDPE and LDPE blends: influence of branch content and composition distribution // Polymer. 2003. — v. 44 (16). — p. 4665−4672-
- Chen F., Shanks R., Amarasinghe G. Miscibility behavior of metallocene polyethylene blends // Journal of Applied Polymer Science. 2001. — v. 81 (9).-p. 2227−2236-
- Tanem B.S., Stori A. Investigation of phase behaviour in the melt in blends of single-site based linear polyethylene and ethylene-1-alkene copolymers // Polymer. 2001. — v. 42. — p. 4309−4319-
- Barham P.J., Hill M.J., Keller A., Rosney C.C.A. Phase separation in polyethylene melts // Journal of Materials Science Letters. 1988. — v. 7 (12).-p. 1271−1275-
- Hill M.J., Barham P.J., Keller A., Rosney C.C.A. Phase segregation in melts of blends of linear and branched polyethylene // Polymer. 1991. — v. 32 (8). -p. 1384−1393-
- Hill M.J., Barham P.J. Liquid-liquid phase separation in melts of blends of linear with branched polyethylenes: morphological exploration of the phase diagram // Polymer. 1992. — v. 33 (19). — p. 4099−4107-
- Hill M.J., Barham P.J. Diffusion effects in blends of linear with branched polyethylenes // Polymer. 1992. — v. 33 (23). — p. 4891−4897-
- Hill M.J., Barham P.J. Liquid-liquid phase separation in blends of linear polyethylenes with a series of octane copolymers of differing branch content // Polymer. 1993. — v. 34 (14). — p. 2975−2980-
- Matsuba G., Shimizu K., Wang H., Wang Z., Han C.C. Kinetics of phase separation and crystallization in poly (ethylene-ran-hexene) and poly (ethylene-ran-octene) // Polymer. 2003. — v. 44 (24). — p. 7459−7465-
- Krumme A., Lehtinen A., Viikna A. Crystallization behavior of high density polyethylene blends with bimodal molar mass distribution. 1. Basic characteristics and isothermal crystallization // European Polymer Journal. -2004. v. 40 (2). — p. 359−369-
- Гуняев Г. М. Структура и свойства полимерных волокнистых композитов, М.: «Химия», 1981 г.-
- ПЗ.Перлин С. М., Макаров В. Г. Химическое сопротивление стеклопластиков, М.: «Химия», 1983 г.-
- Tai H.-J., Chou H.-L. Chemical shrinkage and diffusion-controlled reaction of an epoxy molding compound // European Polymer Journal. 2000. — v. 36 (10).-p. 2213−2219-
- Черняк К.И. Эпоксидные компаунды и их применение, Л.: «Судостроение», 1967 г.-
- Ozturk A., Kaynak С., Tincer Т. Effects of liquid rubber modification on the behaviour of epoxy resin // European Polymer Journal. 2001. — v. 37 (12). -p. 2353−2363-
- Зайцев Ю.С., Кочергин Ю. С. Эпоксидные олигомеры и клеевые композиции, Киев «Наукова Думка», 1990 г.-
- Ли Г., Невилл К. Справочное руководство по эпоксидным смолам, пер. с англ., М.: «Химия», 1973 г.-
- Fu В.Х., Namani М., Lee A. Influence of phenyl-trisilanol polyhedral silsesquioxane on properties of epoxy network glasses // Polymer. 2003. -v. 44 (25).-p. 7739−7747-
- Асланов T.A., Ищенко Н. Я. Отверждение ЭД-20 диангидридом и эфирами ангидрида 2-сульфотерефталевой кислоты // Пластические массы. 2004. — № 2. — с. 21−22-
- Kim W.G., Lee J.Y. Contributions of the network structure to the cure kinetics of epoxy resin systems according to the change of hardeners // Polymer. 2002. — v. 43 (21). — p. 5713−5722-
- Meloun J., Krakovsky I., Nedbal J., Ilavsky M. Effect of chemical clusters on photoelastic behaviour and small-angle X-ray scattering of epoxide networks based on poly (oxypropylene)diamines // European Polymer Journal. 2000. -v. 36 (11).-p. 2327−2335-
- Jain P., Choudhary V., Varma I.K. Effect of structure on thermal behaviour of epoxy resins // European Polymer Journal. 2003. — v. 39 (1). — p. 181 187-
- Eloundou J.P. Dipolar relaxations in an epoxy-amine system // European Polymer Journal. 2002. — v. 38 (3). — p. 431−438-
- Liu H., Uhlherr A., Bannister M.K. Quantitative structure-property relationships for composites: prediction of glass transition temperatures for epoxy resins // Polymer. 2004. — v. 45 (6). — p. 2051−2060-
- Barral L., Cano J., Lopez J., Lopez-Bueno I., Nogueira P., Abad M.J., Ramirez. C. Decomposition behavior of epoxy-resin systems cured by diamines // European Polymer Journal. 2000. — v. 36 (6). — p. 1231−1240-
- Mike F., Baselga J., Paz-Abuin S. Fluorescence probe-label methodology for in situ monitoring network forming reactions // European Polymer Journal. -2002. v. 38 (12). — p. 2393−2404-
- Ochi M., Morishita T., Kokufu S., Harada M. Network chain orientation in the toughening process of the elastomer modified mesogenic epoxy resin // Polymer. 2001. — v. 42 (24). — p. 9687−9695-
- Kaynak C., Arikan A., Tincer T. Flexibility improvement of short glass fiber reinforced epoxy by using a liquid elastomer // Polymer. 2003. — v. 44 (8). -p. 2433−2439-
- Yee A.F., Pearson R.A. Toughening mechanisms in elastomer-modofied epoxies. I. Mechanical studies // Journal of Material Science. 1986. — v. 21 (7).-p. 2462−2474-
- Guild F.J., Kinloch A.J. Modeling the properties of rubber-modified epoxy polymers // Journal of Material Science. 1995. — v. 30 (7). — p. 1689−1697-
- Zhang L., Xu Y., Zhao D. A Monte-Carlo study of polymer network dynamics // European Polymer Journal. 2000. — v. 36 (8). — p. 1607−1611-
- Миркамилов T.M., Мухамедгалиев Б. А., Тилляев P.A. Некоторые возможности снижения остаточного напряжения в эпоксиполимерах // Пластические массы. 2000. — № 6. — с. 22−25-
- Yu Х.Х., Lau W.S. A finite-element analysis of residual stress in stretch grinding // Journal of Materials Processing Technology. 1999. — v. 94. — p. 13−22-
- Hong J.K., Tsai C.-L., Dong P. Assessment of numerical procedures for residual stress analysis of multipass welds // Welding Journal. 1998. — v. 77 (9).-p. 372−382-
- Kazakov A. An automated method for the measurement of residual stress in melt-extruded plastic pipes // Polymer Testing. 1998. — v. 17. — p. 443−450-
- Lu X., Brown N. Effect of thermal history on the initiation of slow crack growth in linear polyethylene // Polymer. 1987. — v. 28 (9). — p. 1505−1511-
- Humfeld R.G. Jr., Dillard D.A. Residual stress development in adhesive joints subjected to thermal cycling // Journal of Adhesion. 1998. — v. 65. -p. 277−306-
- Michaleris P., Dantzig J., Tortorelli D. Minimization of welding residual stress and distortion in large structures // Welding Journal. 1999. — v. 78 (11).-p. 361−366-
- Reifsnider К. Fatigue behavior of composite materials // International Journal of Fracture. 1980. — v. 16 (6). — p. 563−583-
- Mackerle J. FEM and BEM analysis and modeling of residual stresses. A bibliography (1998−1999) // Finite Elements in Analysis and Design. 2001. -v. 37.-p. 253−262-
- Ersoy N., Vardar O. Measurement of residual stresse in layered composites by compliance method // Journal of Composite Materials. 2000. — v. 34 (7). -p. 575−598-
- Hodgkinson J.M., Williams J.G. Measurement of residual stresses in plastic pipes // Plastics and Rubber Processing and Applications. 1983. — v. 3 (1). -p. 37−42-
- Kasakevich M.L., Moet A., Chudnovsky A. Comparative crack layer analysis of fatigue and creep crack propagation in high density polyethylene // Polymer. 1990. — v. 31 (3). — p. 435−439-
- Pan C.S., Hsu W. Microstructure for in situ determination of residual strain // Journal of Microelectromechanical Systems. 1999. — v. 8 (2). — p. 200−207-
- Ma H., Deng H.L. Nondestructive determination of welding residual stresses by boundary element method // Advances in Engineering Software. 1998. -v. 29 (2).-p. 89−95-
- Badr E. A, Sorem J.R., Tipton S.M. Residual stress estimation in crossbores with Bauschinger effect inclusion using FEM and strain energy density // Journal of Pressure Vessel Technology, Transactions of the ASME. 1999. -v. 121 (4).-p. 358−363-
- Chen C.R., Liu Y., Li S.X. Characteristics of the stress relaxation in the thinned two-phase multiplayer materials // Materials Science and Engineering A. 1999. — v. 265. — p. 146−152-
- Allam M., Chaaban A., Bazergui A. Estimation of residual stresses in hydraulically expanded tube to — tubesheet joints // Journal of Pressure Vessel Technology, Transactions of the ASME. — 1998. — v. 120 (2). — p. 129−137-
- Demirdzic I., Muzaferija S. Finite volume method for stress analysis in complex domains // International Journal for Numerical Methods in Engineering. 1994. — v. 37 (21). — p. 3751−3766-
- Coats T.W., Harris C.E. Progressive damage methodology for residual strength predictions of notched composite panels // Journal of Composite Materials. 1999. — v. 33 (23). — p. 2193−2224-
- Hwang W., Han K.S. Fatigue of composites fatigue modulus concept and life prediction // Journal of Composite Materials. — 1986. — v. 20 (2). — p. 154−165-
- Sauer J.A., Richardson G.C. Fatigue of polymers // International Journal of Fracture. 1980. — v. 16 (6). — p. 499−532-
- Zhurkov S.N., Kuksenko V.S. Micromechanics of polymer fracture // International Journal of Fracture. 1975. — v. 11 (4). — p. 629−639-
- Homouda H.B.H., Simoes-Betbeder M., Grillon F., Blouet P., Billon N., Piques R. Creep damage mechanisms in polyethylene gas pipes // Polymer. -2001. v. 42 (12). — p. 5425−5437-
- Kramer E.J. Craze fibril formation and breakdown // Polymer Engineering and Science. 1984. — v. 24 (10). — p. 761−769-
- Bhattacharya S.K., Brown N. Initiation of crack growth in linear polyethylene // Journal of Materials Science. 1985. — v. 20 (8). — p. 27 672 775-
- Lustiger A., Corneliussen R.D. The role of crazes in the crack growth of polyethylene // Journal of Material Science. 1987. — v. 22 (7). — p. 24 702 476-
- Wang H., Buchholz F.-G., Richard H.A., Jagg S., Scholtes B. Numerical and experimental analysis of residual stresses for fatigue crack growth // Computational Materials Science. 1999. — v. 16. — p. 104−112-
- Микляев П.Г., Нешпор В. Г., Кудрявцев В. Г., «Кинетика разрушения», М., «Металлургия», 1979, 279 е.-
- Teh J.W., White J.R., Andrews E.H. Fatigue of viscoelastic polymers: 1. Crack-growth characteristics // Polymer. 1979. — v. 20 (6). — p. 755−763-
- White J.R., The J.W. Fatigue of viscoelastic polymers: 1. Fractography // Polymer. 1979. — v. 20 (6). — p. 764−771-
- Ivankovic A., Pandya K.C., Williams J.G. Crack growth predictions in polyethylene using measured traction-separation curves // Engineering Fracture Mechanics. 2004. — v. 71. — p. 657−668-
- Pandya K.C., Williams J.G. Cohesive zone modeling of crack growth in polymers. Part 1 experimental measurement of cohesive law // Plastics, Rubber and Composites. — 2000. — v. 29 (9). — p. 439−446-
- Pandya K.C., Williams J.G. Cohesive zone modeling of crack growth in polymers. Part 2 numerical simulation of crack growth // Plastics, Rubber and Composites. — 2000. — v. 29 (9). — p. 447−452-
- Tonyali K., Rogers C.E., Brown H.R. Stress-cracking of polyethylene in organic liquids // Polymer. 1987. — v. 28 (9). — p. 1472−1477-
- El-Hakeem H.M., Culver L.E. Environmental dynamic fatigue crack propagation in high density polyethylene: an empiric modeling approach // International Journal of Fatigue. 1981. — v. 3 (1). — p. 3−8-
- Duan D.-M., Williams J.G. Craze testing for tough polyethylene // Journal of Material Science. 1998. — v. 33 (3). — p. 625−638-
- Ivankovic A., Venizelos G.P. Rapid crack propagation in plastic pipe: predicting full-scale critical pressure from S4 test results // Engineering Fracture Mechanics. 1998. — v. 59 (5). — p. 607−622-
- Rithiie S.J.K., Davis P., Leevers P. S. Brittle-tough transition of rapid crack propagation in polyethylene // Polymer. 1998. — v. 39 (25). — p. 6657−6663-
- Greig J.M., Leevers P. S., Yayla P. Rapid crack propagation in pressurized plastic pipe 1. Full-scale and small-scale RCP testing // Engineering Fracture Mechanics. — 1992. — v. 42 (4). — p. 663−673-
- Yayla P., Leevers P. S. Rapid crack propagation in pressurized plastic pipe -2. Critical pressures for polyethylene pipe // Engineering Fracture Mechanics. 1992. — v. 42 (4). — p. 675−682-
- Boone P.M., Markov V.B., Vanspeybroeek P. Holographic investigation of brittle crack propagation in plastic pipes // Optics and Lasers in Engineering.- 1996.-v. 24.-p. 215−229-
- Brostow W., Muller W.F. Impact energy and rapid crack propagation in plastic pipes // Polymer. 1986. — v. 27 (1). — p. 76−79-
- Lu X., Brown N. A test for slow crack growth failure in polyethylene under a constant load // Polymer Testing. 1992. — v. 11 (4). — p. 309−319-
- Alhvood W.J., Beech S.H. The development of the «notched pipe test» for the assessment of the slow crack growth resistance of polyethylene pipe // Construction and Building Materials. 1993. — v. 7 (3). — p. 157−162-
- Pfeil M.C., Kenner V.H., Popelar C.H. A fracture mechanics evaluation for the life expectancy of polyethylene butt fusion joints // Engineering Fracture Mechanics. 1993. — v. 44 (1). — p. 91−107-
- Lu X., Brown N. Abnormal slow crack growth in polyethylene // Polymer. -1997. v. 38 (23). — p. 5749−5753-
- Kanninen M.F., O’Donoghue P.E., Popelar C.H., Kenner V.H. A viscoelastic fracture mechanics assessment of slow crack growth in polyethylene gas distibution pipe materials // Engineering Fracture Mechanics. 1990. — v. 36 (6).-p. 903−918-
- Brown N., Donofrio J., Lu X. The transition between ductile and slow-crack-growth failure in polyethylene // Polymer. 1987. — v. 28 (8). — p. 13 261 330-
- Dumpleton P., Bucknall C.B. Comparison of static and dynamic fatigue crack growth rates in high-density polyethylene // International Journal of Fatigue.- 1987.-v. 9(3).-p. 151−155-
- Wang G.S. Strip yield analysis of fatigue crack growth in the residual stress field // International Journal of Fracture. 1999. — v. 96 (3). — p. 247−277-
- Radon J.C. Fatigue crack growth in polymers // International Journal of Fracture. 1980. — v. 16 (6). — p. 533−552-
- Barry D.B., Delatycki O. The effect of molecular structure and polymer morphology on the fracture resistance of high-density polyethylene // Polymer. 1992. — v. 33 (6). — p. 1261−1265-
- Leitao V.M.A., Aliabadi M.H., Rooke D.P., Cook R. Boundary element methods for the analysis of crack growth in the presence of residual stress fields // Journal of Materials Engineering and Performance. 1998. — v. 7 (3). -p. 352−360-
- Lu X., Brown N. The correlation of slow crack growth in linear polyethylene by the J-integral // Polymer. 1989. — v. 30 (12). — p. 2215−2221-
- Han L.-H., Deng Y.-C., Liu C.-D. The determination of Jic for polyethylene pipe using non-standard arc-shaped specimen // International Journal of Pressure Vessels and Piping. 1999. — v. 76 (9). — p. 647−651-
- Brostow W., Fleissner M., Muller W.F. Slow crack propagation in polyethylene: determination and prediction // Polymer. 1991. — v. 32 (3). -p. 419−425-
- Ward A.L., Lu X., Huang Y., Brown N. The mechanism of slow crack growth in polyethylene by an environmental stress cracking agent // Polymer. 1991. — v. 32 (12). — p. 2172−2178-
- Singleton C.J., Roche E., Geil P.H. Environmental stress cracking of polyethylene // Journal of Applied Polymer Science. 1977. — v. 21 (9). — p. 2319−2340-
- Fleissner M. Experience with a full notch creep test in determining the stress crack performance of polyethylenes // Polymer Engineering and Science. -1998. v. 38 (2). — p. 330−340-
- Shah A., Stepanov E.V., Klein M., Hiltner A., Baer E. Study of polyethylene pipe resins by a fatigue test that simulates crack propagation in real pipe // Journal of Material Science. 1998. — v. 33 (13). — p. 3313−3319-
- Clutton E.Q., Rose L.J., Capaccio G. Slow crack growth and impact mechanisms in polyethylene // Plastics, Rubber and Composites. 1998. — v. 27 (10).-p. 478−482-
- Lu X.C., Brown N. Relationship of the initiation stage to the rate of slow crack growth in linear polyethylene // Journal of Material Science. 1986. -v. 21 (7). — p. 2423−2429-
- Brown N., Lu X., Huang Y., Harrison I.P., Ishikawa N. Fundamental material parameters that govern slow crack growth in linear polyethylenes // Plastics, Rubber and Composites Processing and Applications. 1992. — v. 17 (4). — p. 255−258-
- Shah A., Stepanov E.V., Capaccio G., Hiltner A., Baer E. Stepwise fatigue crack propagation in polyethylene resins of different molecular structure // Journal of Polymer Science, Part B (Polymer Physics). 1998. — v. 36 (13). -p. 2355−2369-
- Lu X., McGhie A., Brown N. The dependence of slow crack growth in a polyethylene copolymer on test temperature and morphology // Journal of Polymer Science, Part B: Polymer Physics. 1992. — v. 30 (11). — p. 1207 -1214-
- Cawood M.J., Channell A.D., Capaccio G. Crack initiation and fibre creep in polyethylene // Polymer. 1993. — v. 34 (2). — p. 423−425-
- Lu X., Brown M. Unification of ductile failure and slow crack growth in an ethylene-octene copolymer // Journal of Material Science. 1991. — v. 26 (3). -p. 612−620-
- Huang Y.-L., Brown N. Dependence of butyl branch density on slow crack growth in polyethylene. Kinetics // Journal of Polymer Science, Part B: Polymer Physics. 1990. — v. 28 (11). — p. 2007−2021-
- Yeh J.T., Chen J.-H., Hong H.-S. Environmental stress cracking behavior of short-chain branch polyethylenes in Igepal solution under a constant load // Journal of Applied Polymer Science. 1994. — v. 54 (13). — p. 2171−2186-
- Zhou Z., Brown N. Slow crack growth of blends of high density and linear low density polyethylenes as influenced by morphology // Polymer. 1994. -v. 35 (17).-p. 3619−3623-
- Chan M.K.V., Williams J.G. Slow stable crack growth in high density polyethylenes // Polymer. 1983. — v. 24 (2). — p. 234−244-
- Plummer C.J.G., Goldberg A., Ghanem A. Micromechanics of slow crack growth in polyethylene under constant tensile loading // Polymer. 2001. — v. 42 (23).-p. 9551−9564-
- Bedoui F., Diani J., Regnier G. Micromechanical model of slow crack growth in polyolefin // Polymer. 2004. — V. 45 (7). — p. 2433−2442-
- Lu X., Qian R., Brown N. Discontinuous crack growth in polyethylene under a constant load // Journal of Material Science. 1991. — v. 26 (4). — p. 917 924-
- Lu X., Brown N. A fundamental theory for slow crack growth in polyethylene // Polymer. 1995. — v. 36 (3). — p. 543−548-
- Zhou Z., Brown N. The effect of orientation on slow crack growth in high-density polyethylene // Polymer. 1994. — v. 35 (9). — p. 1948−1951-
- Тамм И.Е. //ЖТЭФ, т. 3, № 1, c.34−37-
- Дерягин Б.В., Кротова H.A., Смилга В. П. Адгезия твердых тел, М.: Наука, 1973-
- Shokley W. //Phys. Rev., 1939, v. 56, № 2, p. 317−322- в кн.: Поверхностные свойства твердых тел, М., Мир, 1972-
- Baszkin A., Ter-Minassian-Saraga L. Effect of surface polarity on self-adhesion of polymers // Polymer. 1978. — v. 19 (9). — p. 1083−1088-
- Baszkin A., Nishino M., Ter-Minassian-Saraga L. Solid-liquid adhesion of oxidized polyethylene films. Effect of temperature on polar forces. // Journal of Colloid and Interface Science. 1977. — v. 59 (3). — p. 516−524-
- Fabish T.J., Saltsburh H.M., Hair M.L. //Journal of Applied Physics. 1976. — v. 47.-p. 356−361-
- B.Jl. Вакула, JI.M. Притыкин Физическая химия адгезии полимеров, М., Химия, 1984, 224 е.-
- Э.Кинлок «Адгезия и адгезивы», Москва «Мир», 1991 г.-
- Bag D.S., Kumar V.P., Maiti S. Chemical modification of LDPE film // Journal of Applied Polymer Science. 1999. — v. 71 (7). — p. 1041−1048-
- M. M. Гольдберг, А. В. Корюкин, Э. К. Кондратов «Покрытия для полимерных материалов», Москва «Химия», 1980 г., 390 е.-
- Gheysari D., Behjat A., Haji-Saeid М. The effect of high-energy electron beam on mechanical and thermal properties of LDPE and HDPE // European Polymer Journal. 2001. — v. 37 (2). — p. 295−302-
- Takashima K., Oda T. Antistatic process of dielectric thin films using low pressure discharge plasma // Journal of Electrostatics. 1999. — v. 46 (2−3). -p. 193−206-
- Lei J., Liao X. Surface graft copolymerization of acrylic acid onto LDPE film through corona discharge // European Polymer Journal. 2001. — v. 37 (4). -p. 771−779-
- Shi L. Characterization of the flame retardancy of EVA copolymer by plasma grafting of acrylic acid // European Polymer Journal. 2000. — v. 36 (12). -p. 2611−2615-
- Gancarz I., Bryjak J., Bryjak M., Pozniak G., Tylus W. Plasma modified polymers as a support for enzyme immobilization. 1. Allyl alcohol plasma // European Polymer Journal. 2003. — v. 39 (8). — p. 1615−1622-
- Zhao J., Geuskens G. Surface modification of polymers VI. Thermal and radiochemical grafting of acrylamide on polyethylene and polystyrene // European Polymer Journal. 1999. — v. 35 (12). — p. 2115−2123-
- Strobel M., Branch M.C., Ulsh M., Kapaun R.S., Kirk S., Lyons C.S. Flame surface modification of polypropylene film // Journal of Adhesion Science and Technology. 1996. — v. 10 (6). — p. 515−539-
- Sun Q.C., Zhang D.D., Wadsworth L.C. Corona treatment on polyolefin films // TAPPI Journal. 1998. — v. 81 (8). — p. 177−183-
- Akhtarkhavari A., Kortschot M.T., Spelt J.K. Adhesion and durability of latex paint on wood fiber reinforced polyethylene // Progress in Organic Coatings. 2004. — v. 49. — p. 33−41-
- Park S.-J., Jin J.-S. Effect of corona discharge treatment on the dyeability of low-density polyethylene film // Journal of Colloid and Interface Science. -2001.-v. 236.-p. 155−160-
- Seto F., Muraoko Y., Akagi T., Kishida A., Akashi M. Surface grafting of polyvinylamine onto polyethylene film by corona discharge-induced grafting // Journal of Applied Polymer Science. 1999. — v. 72 (12). — p. 1583−1587-
- Merex F.P.M. Improved adhesive properties of high-modulus polyethylene structures: 2. Corona grafting of acrylic acid // Polymer. 1993. — v. 34 (9). -p. 1981−1983-
- Lee J.H., Jung H.W., Kang I.-K., Lee H.B. Cell behaviour on polymer surfaces with different functional groups // Biomaterials. 1994. — v. 15 (9). -p. 705−711-
- Goldman M., Goldman A., Sigmond R.S. Corona discharge, its properties and specific uses // Pure and Applied Chemistry. 1985. — v. 57 (9). — p. 1353−1362-
- Friedrich J.F., Rohrer P., Saur W., Gross T., Lippitz A., Unger W. Improvement in polymer adhesivity by low and normal pressure plasmasurface modification // Surface and Coatings Technology. 1993. — v. 59 (1−3).-p. 371−378-
- Blythe A.R., Briggs D., Kendall C.R., Ranee D.G., Zichy V.G.I. Surface modification of polyethylene by electrical discharge treatment and the mechanism of autoadhesion // Polymer. 1978. — v. 19 (11). — p. 1273−1278-
- Adamiak K., Inculet I.I., Castle G. S. P. The control of corona current distribution using shaped electrodes // Journal of Electrostatics. 1993. — v. 30.-p. 381−392-
- Yamamoto T., Newsome J.R., Ensor D.S. Modification of surface energy, dry etching, and organic film removal using atmospheric-pressure pulsed-corona plasma // IEEE Transactions on Industry Applications. 1995. — v. 31 (3). — p. 494−499-
- Sugawara M. Generation of a highly uniform and large area corona discharge source adaptable to surface treatment // Surface and Coatings Technology. -2001. v. 142−144. — p. 290−292-
- Kim K.S., Ryu C.M., Park C.S., Sur G.S., Park C.E. Investigation of crystallinity effects on the surface of oxygen plasma treated low density polyethylene using X-ray photoelectron spectroscopy // Polymer. 2003. — v. 44 (20).-p. 6287−6295-
- Banik I., Kim K.S., Yun Y.I., Kim D.H., Ryu C.M., Park C.S., Sur G.S., Park C.E. A closer look into the behavior of oxygen plasma-treated high-density polyethylene // Polymer. 2003. — v. 44 (4). — p. 1163−1170-
- Hyun J. A new approach to characterize crystallinity by observing the mobility of plasma treated polymer surfaces // Polymer. 2001. — v. 42 (15). -p. 6473−6477-
- Gerensen L.J., Elinan J.F., Mason M.G., Pochan J.M. E.s.c.a. studies of corona-discharge-treated polyethylene surfaces by use of gas-phase derivatization // Polymer. 1985. — v. 26 (8). — p. 1162−1166-
- Catoire B., Bouriot P., Demuth O., Baszkin A., Chevrier M. Physico-chemical modifications of superficial regions of low-density polyethylene (LDPE) film under corona discharge // Polymer. 1984. — v. 25 (6). — p. 766 772.
- Salili S., Beller A., Ziari Z., Kahlouche A, Segui Y. Measure and analysis of potential decay in polypropylene films after negative corona charge deposition // Journal of Electrostatics. 2003. — v. 57 (2). — p. 169−181-
- Molinie P. Charge injection in corona-charged polymeric films: potential decay and current measurements // Journal of Electrostatics. 1999. — v. 45. -p. 265−273-
- Moreno R.A., Gross B. Measurement of potential buildup and decay, surface charge density, and charging currents of corona-charged polymer foil electrets // Journal of Applied Physics. 1976. — v. 47 (8). — p. 3397−3402-
- Das-Gupta D.K. Decay of electrical charges on organic synthetic polymer surfaces // IEEE Transactions on Electrical Insulation. 1990. — v. 25 (3). -p. 503−508-
- Giacometti J. A., Oliveira O.N. Jr. Corona charging of polymers // IEEE Transactions on Electrical Insulation. 1992. — v. 27 (5). — p. 924−943-
- Xiao G. Solvent-induced changes on corona-discharge-treated polyolefin surfaces probed by contact angle measurements // Journal of Colloid and Interface Science. 1995. — v. 171. — p. 200−204-