Разработка многокомпонентных биоактивных наноструктурных покрытий на основе карбида титана для имплантатов
Диссертация
Проведены биологические испытания покрытий методами in vitro и in vivo, а также токсикологические и саиитарио-химические испытания, испытания на стерильность титановых пластин для челюстно-лицевой хирургии и дентальных имплантатов для стоматологии с осажденными на них МБНП. Изучен процесс интеграции имплантатов с нанесенными на них МБНП в костную ткань. Установлено, что МБНП являются… Читать ещё >
Содержание
- ГЛАВА 1. АНАЛИТИЧЕСКИЙ ОБЗОР ЛИТЕРАТУРЫ
- 1. 1. Материалы для искусственных имплантатов
- 1. 1. 1. Полимеры
- 1. 1. 2. Керамические материалы
- 1. 1. 3. Металлические материалы
- 1. 1. 4. Композиционные материалы
- 1. 2. Биосовместимые покрытия для металлических имплантатов
- 1. 2. 1. Са- и Р- содержащие покрытия
- 1. 3. Методы нанесения покрытий на металлические имплантаты
- 1. 3. 1. Физическое осаждение (PVD)
- 1. 3. 1. 1. Вакуумное испарение
- 1. 3. 1. 2. Катодно-дуговое осаждение
- 1. 3. 1. 3. Магнетронное распыление
- 1. 3. 1. Физическое осаждение (PVD)
- 1. 1. Материалы для искусственных имплантатов
- 1. 4. Перспективы использования композиционных СВС-мишеней для магнетронного распыления
- 2. 1. Получение композиционных мишеней методом СВС
- 2. 2. Магнетронное напыление покрытий
- 2. 3. Методы исследования структуры и химического состава покрытий
- 2. 4. Определение топографии поверхности покрытий
- 2. 5. Исследование механических свойств покрытий
- 2. 6. Определение адгезионной прочности покрытий
- 2. 7. Исследование трибологических свойств покрытий
- 3. 1. Элементный состав покрытий
- 3. 2. Структура покрытий
- 3. 2. 1. Морфология покрытий
- 3. 2. 2. Фазовый состав покрытий
- 3. 2. 3. Размер зерна
- 3. 2. 4. Топография поверхности
- 3. 3. Выводы
- 4. 1. Механические свойства
- 4. 2. Трибологические свойства
- 4. 2. 1. Трибологические свойства покрытий, испытанных на воздухе
- 4. 2. 2. Трибологические свойства покрытий, испытанных в физиологическом растворе
- 4. 3. Выводы
- 5. 1. Система покрытие/подложка TiN
- 5. 2. Система покрытие/подложка Целлит-Н
- 5. 3. Система покрытие/подложка А
- 5. 4. Выводы.118″
Список литературы
- Williams D.F. // Definitions in Biomaterials: Proceedings of a Consensus Conference of the European Society for Biomaterials, Elsevier, Amsterdam, 1987.
- Katti K.S. Biomaterials in total joint replacement // Colloids and Surfaces B: Biointerfaces, 39(3), 2004, pp. 133−142.
- Campbell A. Bioceramics for implant coatings // Materials today, 2003, pp. 2630.
- Reuter S., WeBkamp В., Biischer R., Fischer A., Barden В., Loer F., Buck V. Correlation of structural properties of commercial DLC-coatings to their tribological performance in biomedical applications // Wear, 261, 2006, pp. 419−425.
- Hench L.L. Bioceramics // Journal of the American Ceramic Society, 81 (7), 1998, pp. 1705−1728.
- Suchanek W., Yoshimura M. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants // Journal of Materials Research, 13 (1), 1998, pp. 94−117.
- Mandl S., Rauschenbach B. Improving the biocompatibility of medical implants with plasma immersion ion implantation // Surface and Coatings Technology, 156, 2002, pp. 276−283.
- Дорожкин C.B., Агатопоулус С. Обзор рынка // Химия и жизнь, № 2, 2002, с. 8−10.
- Tiainen V-M. Amorphous carbon as a bio-mechanical coating mechanical properties and biological applications // Diamond and Related Materials, 10, 2001, pp. 153−160.
- Wang M. Developing bioactive composite materials for tissue replacement // Biomaterials, 24(13), 2003, pp. 2133−2151.
- Rosato D.V., in: Szycher M. Biocompatible Polymers, Metals and Composites //Technomic Publications, 1983, pp. 1022.
- Ramakrishna S., Mayer J., Wintermantel E., Leong K.W. Biomedical applications of polymer-composite materials: A review // Composites Science and Technology, 61 (14), 2001, pp. 1189−1224.
- Buford A., Goswami T. Review of wear mechanisms in hip implants: paper I-general // Materials and design, 25(5), 2004, pp. 385−393.
- Rusin R.P., Fischman G.S., in: Rusin R.P., Fischman G.S. (Eds.) Bioceramics: Materials and Applications II // American Ceramic Society, Westerville, OH, USA, 1996.
- Hulbert S.F., Hench L.L., in: Vineenzini P. // High Technology Ceramics, Elsevier, Amsterdam, 1987, pp. 3−24.
- Helmer J.D., Driskell T.D. // Research on bioceramics, in Proceedings of the Symposium on Use of Ceramics as Surgical Implants, Clemson University, SC, USA, 1969.
- Kokubo Т., Kim H-M., Kawashita M. Novel bioactive materials with different-mechanical properties // Biomaterials, 24, 2003, pp. 2161−2175.
- Hench L.L. Bioceramics: from concept to clinic. // Journal of the American-Ceramic Society, 74, 1991, pp. 1487−1510.
- Aoki H., Kato K., Ogiso M., Tabata T. Sintered hydroxyapatite as a new dental implant materials // Journal of Dental Outlook, 49, 1977, pp. 567−575.
- Rejda B.V., Peelen J.G.J., de Groot K. Tricalcium phosphate as a bone substitute //Journal of Bioengineering, 1, 1977, pp. 93−97.
- Хамраев Т.К. Применение гранулята керамики гидроксиапатита для замещения дефектов костной ткани челюсти // Автореферат кандидатской диссертации, М., 1995.
- Grill A. Diamond-like carbon coatings as biocompatible materials an overview // Diamond and Related Materials, 12, 2003, pp. 166−170.
- Liu X., Chu P.K., Ding C. Surface modification of titanium, titanium alloys, and related materials for biomedical applications // Materials Science and Engineering, R47, 2004, pp. 49−121.
- Lee В.-Н., Kim Y.D., Lee К.Н. XPS study of bioactive graded layer in Ti-In-Nb-Ta alloy prepared by alkali and heat treatments // Biomaterials, 24, 2003, pp. 2257−2266.
- Иетржик М.И., Филонов M.P., Печёркин K.A., Левашов Е. А., Олесова В. Н., Поздеев А. И. Износостойкость и механические свойства сплавов-медицинского назначения // Известия Вузов. Цветная Металлургия, № 6, 2005, с. 62−69.
- Сплавы с эффектом памяти формы / Под редакцией X. Фунакубо. Перевод с японского, М., Металлургия, 1990.
- Петржик М.И. / Высокотемпературный эффект запоминания формы в твердых растворах на основе титана: Автореферат кандидатской диссертации, М., ИМЕТ РАН, 1992.
- Ohtsuki С., Iida Н., Hayakawa S., Osaka A. Bioactive of titanium treated with hydrogen peroxide solutions containing metal chlorides // Journal of Biomedical Materials Research, 35, 1997, pp. 39−47.
- Wen H.B., Liu Q., Wijn J.R., de Groot K. Preparation of bioactive microporous titanium surface by two-step chemical treatment // Journal of Materials
- Science: Materials in Medicine, 9 (3), 1998, pp. 121−128.
- Kokubo Т., Miyaji F., Kim H.M., Nakamura T. Spontaneous apatite formation' on chemically treated titanium metals // Journal of the American Ceramic
- Society, 79, 1996, pp. 1127−1129.th
- Wang M., Deb S., Tanner K., Bonfield W // Proceedings of the 7 European
- Conference on Composite Materials, London, 1996, p. 455.
- Reis R.L., Cuncha A.M. Characterization of two biodegradable polymers of potential application within the biomaterials field // Journal of Materials Science: Materials in Medicine, 6 (12), 1995, pp. 786−792.
- Sousa R.A., Mano J.F., Reis R.L., Cuncha A.M., Bevis M.J. Mechanical performance of starch based bioactive composite biomaterials molded with preferred orientation // Polymer Engineering and Science, 42 (5), 2002, pp. 1032−1045.
- Watari F., Yokoyama A., Saso F., Uo M., Kawasaki T. Fabrication and properties of functionally graded dental implant // Composites Part B: Engineering (UK), 28B (1−2), 1997, pp. 5−11.
- Bakos D., Soldan M., Hernandez-Fuentes I. Hydroxyapatite-collagen-hyaluronic acid composite //Biomaterials, 20 (2), 1999, pp. 191−195.
- Spector M. Biomaterial failure// Orthopedic Clinics of North America, 23 (2), 1992, pp. 211−217.
- Cyster L.A., Parker K.G., Parker T.L., Grant D.M. The effect of surface chemistry and nanotopography of titanium nitride (TiN) films on 3T3-L1 fibroblasts // Journal of Biomedical Research, 67 A, 2003, pp. 138−147.
- Piscanec S., Ciacchi L.C., Vesselli E., Comelli G., Sbaizero O., Meriani S., De Vita A. Bioactivity of TiN-coated titanium implants // Acta Materialia, 5, 2004, pp. 1237−1245.
- Cheng Y., Zheng Y.F. Characterization of TiN, TiC and TiCN coatings on Ti-50.6 at.% Ni alloy deposited by PHI and deposition technique // Surface and Coatings Technology, 201, 2007, pp. 4909−4912.
- Lin C.-M., Yen S.-K. Characterization of electrolytic Ti02 coating on Ti for biomedical applications // Journal of The Electrochemical Society, 151 (12), 2004, pp. D127-D133.
- Bull S.J., Bhat D.G., Staia M.H. Properties and performance of commercial TiCN coatings. Part 1: coating architecture and hardness modeling // Surface and coatings technologies, 163−164, 2003, pp. 499−506.
- Bull S.J., Bhat D.G., Staia M.H. Properties and performance of commercial TiCN coatings. Part 2: tribological performance // Surface and coatings technologies, 163−164, 2003, pp. 507−514.
- Karlsson L., Hultman L., Johansson M.P., Sundgren J.-E., Ljungcrantz H. Growth, microstructure, and mechanical properties of arc evaporated TiCxNix (0
- Kim K.H., Jung Tae Ok, Abraham S., Cho Y.-R., Park I.-W., Moore J.J. // Syntheses and mechanical properties of Ti-B-C-N coatings by a plasma-enhanced chemical vapor deposition // Surface and coatings technology, 201, 2006, pp. 4185−4189.
- Stoiber M., Badisch E., Lugmair C., Mitterer C. Low-friction TiN coatings deposited by PACVD // Surface and coatings technology, 163−164, 2003, pp. 451−456.
- Hauert R. A review of modified DLC coatings for biological applications // Diamond and Related Materials, 12, 2003, pp. 583−589.
- Cui F.Z., Li D.J. A review of investigations on biocompatibility of diamondlike carbon and carbon nitride films // Surface and Coatings Technology, 131, 2000, pp. 481−487.
- Benchikh N., Garrelie F., Wolski K., Donnet C., Fillit R.Y., Rogemond F., Subtil J.L., Rouzaud J.N., Laval J.Y. Nanocomposite tantalum-carbon-based films deposited by femtosecond pulsed laser ablation // Thin Solid Films, 494, 2006, pp. 98−104.
- Spivak J.M., Ricci J.L., Blumenthal N.C., Alexander H. A new canine model to evaluate the biological response of intramedullary bone to implant materials and surfaces// Journal of Biomedical Materials Research, 24 (9), 1990, pp. 1121−1149.
- Fini M., Cigada A., Rondelli G., Chiesa R., Giardino R., Giavaresi G., Aldini N.N., Torricelli P., Vicentini B. In vitro and in vivo behaviour of Ca- and P-enriched anodized titanium//Biomaterials, 20, 1999, pp. 1587−1594.
- Lee J. //Biomedical Materials Engineering, 5, 1995, pp. 49.
- Leeuwenburgh S.C.G., Wolke J.G.C., Schoonman J., Jansen J.A. Influence of deposition parameters on morphological properties of biomedical calcium phosphate coatings prepared using electrostatic spray deposition // Thin Solid
- Films, 472, 2005, pp. 105−113.
- Maxian S.H., Zawadsky J.P., Dunn M.G. Effect of Ca/P coating resorption and surgical fit on the bone/implant interface // Journal of Biomedical Materials Research, 28(11), 1994, pp. 1311−1320.
- Cheung H.S., McCarty D.J. Mitogenesis induced by calcium-containing crystals. Role of intracellular dissolution// Experimental Cell Research, 157 (1), 1985, pp. 63−70.
- Григорьян A.C., Иванов B.C., Паникаровский B.B., Сабанцева Е. Г., Антипова З. П., Хамраев Т. К. // Стоматология.-3.-1994.-С. 7−10.
- El Deeb о. М.Е., El Deeb а. М.Е., Bevis R.R., Gomez-Marin О. Canines erupted through grafted alveolar cleft defects in patients with alveolar clefts: a pulp testing evaluation study // Cleft Palate Journal, 26 (2), 1989, pp. 100−104.
- Ettel R.G., Schaffer E.M., Holpuch R.C., Bandt C.L. Porous hydroxyapatite grafts in chronic subcrestal periodontal defects in rhesus monkeys: a histological investigation // Journal of Periodontology, 60 (6), 1989, pp. 342 351.
- Yang Y., Kim K-H., Ong J. L A review on calcium phosphate coatings produced using a sputtering process-an alternative to plasma spraying // Biomaterials, 26, 2005, pp. 327−337.
- Furlong R.J., Osborn J.F. Fixation of hip prostheses by hydroxyapatite ceramic coatings // Journal of Bone and Joint Surgery, 73B, 1991, pp. 741−745.
- Thian E.S., Huang J., Best S.M., Barber Z.H., Bonfield W. Magnetron co-sputtered silicon-containing hydroxyapatite thin films-an in vitro study // Biomaterials, 26, 2005, pp. 2947−2956.
- Vepfek S. The search for novel, superhard materials // Journal of Vacuum Science Technology A, Vol. 17 (5), 1999, pp. 2401−2420.
- Musil J., Vlcek J. Magnetron sputtering of hard nanocomposite coatings and their properties // Surface and Coatings Technology., 142−144, 2001, pp. 557 566.
- Bunshah R.F. Evaporation // CEI Course on Deposition Technology And Their1. Applications, May, 1981.
- Хокинг M., Васантасри В., Сидки П. Металлические и керамические покрытия. //М.: Мир, 2000, с. 48−49, 66−75, 289−295.
- Mattox D.M. / Handbook of Physical Vapor Deposition (PVD) Processing, ISBN 0−8155−1422−0, Noyes Publications, Westwood, NJ., 1998.
- Voevodin A.A., Zabinski J.S. Superhard, functionally gradient, nanolayered and nanocomposite diamond-like carbon coatings for wear protection // Diamond and Related Materials, 7, 1998, pp. 463−467.
- Штанский Д.В., Левашов E.A., Хавский H.H., Мур Дж.Дж. Перспективы создания композитных износостойких пленок, полученных с использованием СВС катодов // Известия вузов. Цветная Металлургия, 1996, № 1, с. 59−68.
- Gutmanas E.V. Materials with fine Microstructure by Advanced Powder*. Metallurgy // Progress in Materials Science, 34- 1990, p. 261−366.
- Левашов E.A., Рогачев A.C., Юхвид В. И., Боровинская И. П. Физико-химические и технологические основы самораспространяющегося высокотемпературного синтеза. М.: БИНОМ, 1999, с 176.
- Levashov Е.А., Shtansky D.V., Sheveiko A.N., Moore J.J. SHS of composite sputtering targets and structure and properties of PVD thin films // Proceedings of the 14 Int. Plansee Seminar' 97, May 12−16, Reutte, Austria, 1997, vol. 3, p. 276.
- Кипарисов С.С., Левинский Ю. В., Петров А. П. Карбид титана, М.: Металлургия, 1987.
- Научно-технологическое обеспечение инновационной деятельности предприятий, институтов и фирм в металлургии. Под ред. Кожитова Л. В.,
- Дуба А.В., Издательство «Учеба МИСиС», Москва, т.2, с. 474−482.
- NHT Hardware Guied. Nano Hardness Tester Instrument. Introduction, CSEM, May, 1998.
- Li X., Bhushan B. A review of nanoindentation continuous stiffness measurement technique and its applications // Materials Characterization, 48 (1), 2002, pp. 11−36.
- Leyland A., Mattews A. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimized tribological behaviour // Wear, 246, 2000, pp. 1−11.
- Tribometer Pin-on-Disk. TECHNICAL FEATURES, Copyright CSEM Instruments, 2001.
- Guruvenket S., Mohan Rao G. Effect of ion bombardment and substrate orientation on structure and properties of titanium nitride films deposited by unbalanced magnetron sputtering // Journal of Vacuum Science and Technology, A 20 (3), 2002, pp. 678−682.
- Штанский Д.В., Левашов E.A., Глушанкова H.A., Лясоцкий И. В., Росси Ф. Новые твердые биосовместимые тонкопленочные материалы в системах Ti-Ca-C-N-О и Ti-Zr-C-N-O для медицины // Физика металлов и металловедение, 2004, 97, № 5, с. 34−43.
- Hsieh W.-J., Lai S.-H., Chan L.-H., Chang K.-L., Shin H.-C. Cathodoluminescence and electron field emission of boron-doped a-C:N films // Carbon, 2005, 43 (4), pp. 820−826.
- Lu Y.H., Shen Y.G., Zhou Z.F., Li K.Y. Effects of nitrogen content on microstructure and oxidation behaviors of Ti-B-N nanocomposite thin films // Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films 24, 2006, pp. 340−349.
- Lohse B.H., Calka A. Raman spectroscopy sheds new light on TiC formation during the controlled milling of titanium and carbon // Journal of Alloys and Compounds 434−435, 2007, p. 405.
- Spengler W., Kaiser R., Christensen A.N., Muller-Vogt G. Raman scattering, superconductivity, and phonon density of states of stoichiometric and nonstoichiometric TiN // Physical Review, В 17, 1978, pp. 1095−1101.
- Tamor M.A., Vassell W.C. Raman «fingerprinting» of amorphous carbon films //Journal of Applied Physics, 76, 1994, pp. 3823−3830.
- Nakamoto K. Infrared spectra of inorganic and coordination compounds, John Wiley & Sons Inc., New York, London, 1962.
- Gervais F., Piriou B. Temperature dependence of transverse- and longitudinal-optic modes in ТЮ2 (rutile) // Physical Review, В 10, 1974, pp. 1642−1654.
- Штанский Д.В. Просвечивающая электронная микроскопия высокого разрешения в нанотехнологических исследованиях. Обзор // Российский химический журнал 2002, т. XLVI, № 5.
- Ericsson I, Johansson CB, Bydedt H, Norton MR. A histomorphometric evaluation of bone-to-implant contact on machine-prepared and roughened titanium dental implants. A pilot study in the dog // Clinical oral implants research, 5, 1994, pp. 202−206.
- Johansonn C, Albrektsson T. A removal torque and histomorphometric study of commercial pure-niobium and titanium implants in rabbit bone // Clinical oral implants research, 2, 1991, pp. 24−29.
- Gotfredsen K, Nimb L, Hjorting-Hansen E, Jensen SJ, Zholmen A. Histomorphometric and removal torque analysis for Ti02-blasted titanium implants. An experimental study in dogs // Clinical oral implants research, 3,1991, pp. 77−84.
- Archard J.F. Contact and rubbing of flat surfaces// Journal of Applied Physics, 1953, 24, p. 981−988.
- Штанский Д.В., Левашов E.A. Многокомпонентные наноструктурные тонкие пленки — проблемы и решения (обзор) // Известия вузов. Цветная металлургия, 2001, № 3, 52−62.
- Андриевский Р.А., Спивак И. И. Прочность тугоплавких соединений, и материалов на их основе. Справочник. Металлургия, Челябинск, 1989, 386.
- Musil J., Kunc F., Zeman H., Polakova H. Relationships between hardness, Young’s modulus, and elastic recovery in hard nanocomposite coatings // Surface and Coatings Technology, 2002, 154, pp. 304−313.
- Padmanabhan K.A. Mechanical properties of nanostructured materials // Materials Science and Engineering, 2001, A304−306 (1−2), pp. 200−205.
- Hahn H., Padmanabhan K.A. Mechanical response of nanostructured materials // Nanostructured Materials, 1995, 6 (1−4), pp. 191−200.
- Tjong S.C., Chen H: Nanocrystalline materials and coatings // Materials Science and Engineering, R45 (1−2), 2004, pp. 1−88.
- Zhao M., Li J.C., Jiang Q. Hall-Petch relationship in nanometer size range // Journal of Alloys and Compounds, 361 (1−2), 2003, pp. 160−164.
- Giga A., Kimoto Y., Takigawa Y. and Higashi K. Demonstration of an inverse Hall-Petch relationship in electrodeposited nanocrystalline Ni-W alloys through tensile testing // Scripta Materialia, 55 (2), 2006, pp. 143−146.
- Mayrhofer P.H., Mitterer C., Musil J. Structure-property relationships in single- and dual-phase nanocrystalline hard coatings // Surface and Coatings Technology, 174−175, 2003, pp. 725−731.
- Штанский Д.В., Кулинич С. А., Левашов E.A., Moore J.J. Особенности структуры и физико-механических свойств наноструктурных тонких пленок // Физика твердого тела, 2003, т.45, вып. 6, с. 1122−1129.
- Штанский Д.В., Петржик М. И., Башкова И.А., Кирюханцев-Корнеев
- Ф.В., Шевейко А. Н., Левашов Е. А. Адгезионные, фрикционные и деформационные характеристики покрытий Ti-(Ca, Zr)-(C, N,0,P) для ортопедических и зубных имплантов // Физика твердого тела, 2006, т. 48, вып. 7, с. 1231−1238.
- Katipelli L.R., Agarwal A., Dahotre N.B. Laser surface engineered TiC coating on 6061 A1 alloy: Microstructure and wear // Applied Surface Science, 153, 2000, pp. 65−78.
- Badisch E., Fontalvo G.A., Mitterer C. The response of PACVD TiN coatings to tribological tests with different counterparts // Wear, 256 (1−2), 2004, pp. 95−99.
- Heinke W., Leyland A., Matthews A., Berg G., Friedrich C., Broszeit E. Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests // Thin Solid Films, 270 (1−2), 1995, pp. 431−438.
- Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S. A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces // Wear, 254 (3−4), 2003, pp. 278−291.
- J. von Stebut, Rezakhanlou R, Anoun K., Michel H., Gantois M. Major damage mechanisms during scratch and wear testing of hard coatings on hard substrates // Thin Solid Films, 181, 1989, pp. 555−564.
- Wiklund U., Bromark M., Larsson M., Hedenqvist P., Hogmark S. Cracking resistance of thin hard coatings estimated by four-point bending // Surface and
- Coatings Technology, 91 (1−2), 1997, pp. 57−63.
- CSEM Instruments, Application bulletin, 1996.
- Arias J.L., Mayor M.B., Pou J., Leng Y., Leon В., Perez-Amor M. Micro- and nano-testing of calcium phosphate coatings produced by pulsed laser deposition // Biomaterials, 24 (20), 2003, pp. 3403−3408.1. Прилох&Ниие,
- Федеральное агенство по образованию
- Московский государственный институт стали и сплавов (Технологический университет)1. ОКП 19 8411 ГРиС по научной1. В. Кожитов 2005 г.
- Зам. генерального директора чно-производствен-1#
- МИШЕНИ СВС-П ДИСКОВЫЕ ДЛЯ ИОНОПЛАЗМЕННОГО РАСПЫЛЕНИЯ НАНОСТРУКТУРНЫХ ТОНКИХ ПЛЕНОК1. Технические условия1. ТУ 1984−019−11 301 236−20 051. Вводятся впервые
- Срок действия установлен с 14.04.2005 г. до 14.04.2015 г. гассТ^ЙтШ^т России
- ВКИИстаНДарт ЗАРЕГ СТГИГОВА" КАТАЛОЖНЫЙ ЛИСТ1. ЗА №
- Пример условного обозначения дисковой мишени СВС-П марки ССТНД 3−9 с фазовым составом Ti5Si3-MO%CaO диаметром 125 мм:
- Мишень СВС-П марки ССТНД 3−9 Ti5Si3+10%CaO 0 125 мм по ТУ 1984−019−11 301 236−20 051. ТЕХНИЧЕСКИЕ ТРЕБОВАНИЯ
- Основные параметры и характеристики